Maintenace - Rehatec Standard Instructions For Use Manual

Heidelberg upright stander
Table of Contents

Advertisement

1.4.2 M A I N T E N A N C E
Never use a unit that is not in perfect condition.
In case of excessive wear or if worn product parts are
not replaced, the safety of the product may no longer be
guaranteed.
Faults, malfunctions or defects may only be repaired by the
manufacturer or the operator/care provider.
Do not make any changes to the product-
In case of complaints or problems, please contact your care
provider/operator!
Only use original spare parts / accessories or those approved by
Rehatec® GmbH.
Before each use
Please check the following functions before each use:
• All connecting parts and components required for the care of the
patient. You can treat moving parts/mechanisms with a Teflon spray (dry
lubricant) and wipe off excess residue with a soft cloth.
• The function of the brakes.
During use
• It is important that all components are undamaged during use. Therefore,
check them regularly and have them repaired or replaced if necessary.
The upright stander Standard must be serviced every 12 months,
taking into account any maintenance intervals to be carried out
earlier, in accordance with the following inspection schedule.
1023926_EN_0 Subject to technical changes and misprints.
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Standard and is the answer not in the manual?

Subscribe to Our Youtube Channel

Related Products for Rehatec Standard

Table of Contents