Further Use; Reuse Or Reprocessing; Disposal - Rehatec Standard Instructions For Use Manual

1. Intended Use
1. 5 FU R T H E R U S E
1.5.1 R E U S E O R R E P R O C E S S I N G
The operator/care provider is responsible for reuse or reprocessing.
The Upright stander Standard is basically suitable for reuse, although
products in reuse are subject to special stress.
When the product is used again, it is important that all documents
belonging to the unit are handed on to the next user.
Before each reuse, the product must be thoroughly inspected
according to the inspection plan and cleaned according to the
following reprocessing instructions.
Important notes on preparation:
Do not use abrasive agents or rough cloths for the desinfection process.
• The powder-coated base frame and the chrome-plated add-on parts
must be cleaned with a CE-certified surface disinfectant. Dry the parts
thoroughly afterwards. Alternatively, disinfection can also be carried out
in a certified cold fogging system.
• Artificial leather covers must be disinfected with a CE-certified surface
disinfectant. Then dry the covers thoroughly with a microfibre cloth
Alternatively, disinfection can also be carried out in a cold fogging
system.
L I F E T I M E
The lifetime of the product resulting from the risk assessment is 10 years.
1.5.2 D I S P O S A L
The product may not be disposed of with household waste.
The upright stander Standard must be disposed of properly. Please
contact your specialist dealer.
Packaging materials are to be separated according to their waste types
and disposed of via the waste containers in accordance with municipal
recycling rules. Waste disposal may vary from municipality to municipality.
For proper disposal, please contact your municipal waste disposal service
or the administration of your place of residence, if necessary. Observe the
disposal regulations of your country.
10
1023926_EN_0 Subject to technical changes and misprints..