With Swivel Arm Frame - Rehatec Standard Instructions For Use Manual

4. Operation
As a rule, the patient must be supported in this maneuver.
• Remove the patient's feet from the sandals and remove the upright
stander from the patient.
• Close the swivel arm frame (see chapter „Standing training with swivel
arm frame") and mount the back support, if available (see chapter „Back
support").
4.2.2 W I T H S W I V E L A R M F R A M E
• If the upright stander has a back support, it must first be removed (see
chapter „Back support").
• Position the patient's seat as close as possible to the upright stander and
ensure that both upright stander and seat are secured against rolling
away (lock castors if present).
• Fold the tray completely forwards or upwards.
The patient must hold on to the frame or be supported by a
person - otherwise there is a risk of injury!
• Open the swivel arm frame (see chapter „Standing training with swivel
arm frame").
• Lower the patient into the seat.
As a rule, the patient must be supported in this maneuver.
• Remove the patient's feet from the sandals and remove the upright
stander from the patient.
• Close the swivel arm frame (see chapter „Standing training with swivel
arm frame") and mount the back support, if available (see „5.14 Back
support").
20
1023926_EN_0 Subject to technical changes and misprints..