User Management
IMPORTANT!
38
4.6
4.6 Login/logout
Login/logout
Only one user can be logged in to the controller at any given time. Simultaneous
use of the controller by multiple users is not possible.
4.6.1
4.6.1
Login at start up
Login at start up
A login window appears when the controller is started.
Exception: When the default user and auto login are active, the user is automatically
logged into this account; see Chapter: 4.3.3 Advanced Settings
4.6.2
4.6.2
Auto start function
Auto start function
Requirement: Auto start is activated in the default settings of the controller; refer
to the user manual of your controller for more information.
After the controller is restarted, this is only activated if the default user is activated,
auto login is activated and the default user was the last to log in and had started an
application.
4.3.3 Advanced
20901537_EN_Vsel‑Funkterweitg_V1.1_250823
Settings.