Preparing For Installation; Safety Precautions; General Safety Precautions; Handling Safety - Ruijie RG-SAP825-SP Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
2

Preparing for Installation

2.1

Safety Precautions

Note
To avoid personal injury and device damage, carefully read the safety precautions

before you install the device.
The following safety precautions may not cover all possible dangers.

2.1.1

General Safety Precautions

Do not expose the access point to high temperature, dusts, or harmful gases. Do not

install the access point in an inflammable or explosive environment. Keep the access
point away from EMI sources such as large radar stations, radio stations, and
substations. Do not subject the access point to unstable voltage, vibration, and noises.
The installation site should be free from water flooding, seepage, dripping, or

condensation. The installation site should be selected according to network planning,
communications equipment features, and considerations such as climate, hydrology,
geology, earthquake, electrical power, and transportation.
The installation site should be dry. It is not recommended that the access point be

installed in a place near the sea. Keep the device at least 500 meters away from the
ocean and do not face it towards the sea breeze.
Do not place the device in walking areas.

During the installation and maintenance, do not wear loose clothes, ornaments, or

other items that may be hooked by the device.
Keep tools and device away from walking areas.

2.1.2

Handling Safety

Do not move the device frequently.

Turn off all power sources and unplug all power sources and cables before moving or

handling the device.
15
Preparing for Installation