Led And Reset Button - Ruijie RG-SAP825-SP Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
1.4

LED and Reset Button

Note
LED status descriptions are applicable to both Fit and Fat APs, unless otherwise specified.
Table 1-9 LED
Color
Off
Solid green
Solid red
Slow blinking in
red
Fast blinking in
blue
Solid blue
Blinking blue
Fast blinking in
red
Status Description
N/A
N/A The software system is being initialized.
The system is running normally, but the uplink
N/A
service port of the AP is Down.
On for 3s
In Fit AP mode, CAPWAP tunnel establishment
between the AP and the AC has timed out.
Off for 1s
On for 0.2s
In Fit AP or MACC AP mode, the software system is
being updated.
Off for 0.2s
The software system is running normally. The AP is
N/A
working normally but no STA is online.
On for 1s
The software system is running normally. The AP is
working normally and STAs are online.
Off for 1s
On for 0.2s
In Fit AP mode, LED locating function is enabled on
the AP to discover a specific AP.
Off for 0.2s
The AP is not powered on.
The AP is powered on, but the status LED is
turned off through the software.
12
Product Overview