Table of Contents
Advertisement
SureCross MultiHop Data Radio Module
Process
Response
Steps
2
The slave/repeater searches for a parent device.
3
A parent device is detected. The slave/repeater searches
for other parent radios within range.
4
The slave/repeater selects a suitable parent.
5
The slave/repeater attempts to synchronize to the selec-
ted parent.
6
The slave/repeater is synchronized to the parent.
7
The slave/repeater enters RUN mode.
Serial data packets begin transmitting between the slave/
repeater and its parent radio.
Master LED Behavior
All bound radios set to operate as masters follow this LED behavior after powering up.
Process
Response
Steps
1
Apply power to the master radio
2
The master radio enters RUN mode.
Serial data packets begin transmitting between the mas-
ter and its children radios.
Modbus Register Table
Inputs
Register
Input #
I/O Type
(4xxxx)
1
1
2
2
3
3
Discrete IN 3
4
4
Discrete IN 4
5
5
Analog IN 1
6
6
Analog IN 2
P/N 154365 Rev. C
Two Button/LED Models
LED 1
Flashes red
Solid red
-
-
Flashes green
Solid green, then
flashes green
-
Two Button/LED Models
LED 1
-
Flashes green
-
Units
I/O Range
Min. Value Max. Value Min.
-
0
-
0
mA
0.0
mA
0.0
www.bannerengineering.com - tel: 763-544-3164
LED 2
-
-
Solid amber
Solid red
-
Flashes amber
LED 2
Solid amber
-
Flashes amber
Holding Register Rep-
resentation
Max.
(Dec.)
(Dec.)
1
0
1
1
0
1
20.0
0
65535
20.0
0
65535
Single Button/LED
Models
LED
Flashes red (1 per 3
sec)
Solid red
Solid amber
Solid red
Flashes green
Solid green, then flash-
es green
Flashes amber
Single Button/LED
Models
LED
Solid amber
Flashes green
Flashes amber
Pins
Pin 3
Pin 4
Pin 1
Pin 2
7
Advertisement
Table of Contents
