Banner DX80DR9M-HB1 Manual page 10

Surecross multihop data radio module
Table of Contents

Advertisement

Communication
Hardware (MultiHop Board Models, RS-485)
Interface: 2-wire half-duplex RS-485
Baud rates: 9.6k, 19.2k (default), or 38.4k via DIP
switches; 1200, 2400, 57.6k, and 115.2k via the Multi-
Hop Configuration Tool
Data format: 8 data bits, no parity, 1 stop bit
Packet Size (MultiHop)
900 MHz: 175 bytes (85 Modbus registers)
2.4 GHz: 125 bytes (60 Modbus registers)
Intercharacter Timing (MultiHop)
3.5 milliseconds
Certifications
MultiHop M-HBx and Performance PBx Models Mounted on the Base
Most MultiHop M-HBx and Performance PBx models ship from the factory mounted on a plastic base.
94 mm
[3.70"]
84 mm
[3.31"]
Accessories for the Board Models
These accessories are used with the M-HBx MultiHop and -PBx Performance board modules.
Warnings
The manufacturer does not take responsibility for the violation of any warning listed in this document. Make no modifications to this
product. Any modifications to this product not expressly approved by Banner Engineering could void the user's authority to operate the
product. Contact the Factory for more information. All specifications published in this document are subject to change. Banner
reserves the right to modify the specifications of products without notice. Banner Engineering reserves the right to update documentation
10
4.5mm dia
[0.18"]
53 mm
[2.09"]
26.5 mm
[1.04"]
Model No.
BWA-HW-034
www.bannerengineering.com - tel: 763-544-3164
Environmental
Operating Environment
Temperature: −40 to +85° C
Humidity: 95% max. relative (non-condensing)
Radiated Immunity
10 V/m, 80-2700 MHz (EN61000-6-2)
Operating the devices at the maximum operating conditions for ex-
tended periods can shorten the life of the device.
26.8 mm
[1.06"]
Description
DIN rail clip, black plastic
SureCross MultiHop Data Radio Module
P/N 154365 Rev. C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx80dr2m-hb1

Table of Contents