Table of Contents
Advertisement
PROGRAMMING GUIDE
Non-Brew Programming Menu (cont.)
Brew Count Total - when accessed, displays the total brew cycles on the brewer. It cannot be reset. The
display returns to the previous screen automatically after a few seconds.
Cold Brew Lock - adjusts the temperature at which the brewer will brew coffee when the BREW button is
pressed (Ready to Brew
temperature setting. This feature also adjusts the temperature at which the heating element turns on to reheat
choose the desired setting. Then press
Master Reset - resets the brewer universal control module (UCM) to the factory default settings. Once
accessed, "Are You Sure?" will appear on the display. Press
Service Call - sets the service phone number that appears on the display when the UCM detects a SENSOR
ERROR or WATER ERROR . Once accessed, press
to change the number value. Press
repeatedly
and press
.
Access Code - sets the access code entered to access programming mode. The factory default is 1-2-3-4.
Once accessed, press
number value (the range is 1 to 4). Press
press
.
Banner Name - changes the company name that appears on the display. The factory default is Curtis. No
name appears when all blanks are entered. Once accessed, press
Then press
repeatedly
choose ex and press
Warmer Auto-Off - (GEMS, GEMT, GEMSIF, GEMTIF models) adjusts the length of time that elapses before
the dispenser warmer shuts off automatically. This function takes priority over the quality timer. The factory
1 to 12 hours. Once accessed, press
P-Maintenance - turns on/off and adjusts the P-Maintenance (preventive maintenance) brew monitor.
The factory default setting is Off. When On, the UCM measures the number of gallons brewed before the
accessed, press
or
Beeper On/Off - turns the beeper that is heard each time a button is pressed on or off. The factory default
setting is On. Once accessed, press
Drip-out Mode -
to drain from the brew basket before the brew basket lock releases. The factory default is 2 min. This feature
accessed, press
or
Warmers Default - (Gemini models) sets the warmer temperature. The factory default setting is MED. The
press
or
to choose the desired setting, then press
desired setting for the second warmer, then press
*Off option not available on GEMX series models.
to set and exit.
or
to choose the number to change. Then press
or
to choose the next number to change or choose exit and
to change the number value. Press
to exit.
or
to adjust the number of hours. Then press
to choose the desired setting, then, press
or
to choose the desired setting. Then, press
to choose the desired setting, then, press
for Yes or
for No.
or
to choose the number to be changed. Then press
or
to choose the next number to change or choose exit
or
to choose the letter to change.
or
to choose the next number to change or
to exit.
to exit.
press
. On twin brewers
Press
to exit.
.
continued...
PG2
or
to
repeatedly to change the
to set and exit.
to exit.
or
to choose the
H
Advertisement
Table of Contents
