Curtis G3 Gemini IntelliFresh GEMTIF10A2000 User Manual page 15

PROGRAMMING GUIDE
Wilbur Curtis
Wilbur Curtis
Ready to Brew*
Entering
Programming Mode
Enter Code
- - - -
Program menus
<-- Select -->
Non-Brew Prog
Global Recipes
<-- Select --> <-- Select -->
Press Press
See Global See Non-Brew
Recipes Menu Programming Menu
section
Program Menus
<-- Select -->
Label style may vary
To enter programming mode:
With unit OFF, press and hold
bottom right BREW button (4).
Then press and release
ON/OFF button (2). Continue to
hold down BREW button until
Enter Code appears.
* "Ready" on some models
Enter 4 digit code.
(factory default = 1-2-3-4)
Brew Button Prog
<-- Select -->
Press
See Brew Button
Programming Menu
section section
The symbols below the buttons are:
Once you enter programming mode, press
or RIGHT to the various menus (Global Recipes, Non-Brew Prog,
Brew Button Prog, etc.). Press
press
desired menu item appears on the screen, press
access. See Programming Options for detailed descriptions.
Language Model Select
<-- Select --> <-- Select -->
Press Press
See See Model
Language Menu Select Menu
section section
IMPORTANT: All programming functions are performed
with the three center buttons.
Scroll LEFT/UP (1)
SELECT or ENTER to save new parameter (2)
Scroll RIGHT/DOWN (3)
(SELECT) to enter a menu. Then
or to scroll UP or DOWN through a menu. When the
PG2
Label style may vary
Exit
<-- Select -->
Press
or to scroll LEFT
(SELECT) to
H