Curtis G3 Gemini IntelliFresh GEMTIF10A2000 User Manual page 17

PROGRAMMING GUIDE
Non-Brew Programming Menu
Non-Brew Prog
Brew Count Total
<-- Select -->
Press Select
Temperature Cold Brew Lock
<-- Select -->
Select Select
Energy Save Mode
<-- Select -->
Select Select
Brew Count Odom
<-- Select -->
Select Select
1,2
Quality Timer
<-- Select -->
Select Select
Temperature - sets the brewing temperature of the water held in the water tank. The factory default setting is
to choose the desired temperature. Then press
Energy Save Mode - saves energy during periods when the brewer is not in use. The factory default setting is
Once accessed, press
Brew Count Odom - When accessed, this feature displays the total brew cycles since the odometer was last
reset. Press to exit or
Quality Timer -
FEATURES section for a complete description of how the timer operates. The factory default setting is 2 hours
setting. Then press
Banner Name
<-- Select -->
<-- Select -->
Select
Warmers Auto-Off
<-- Select --> <-- Select -->
Select
Master Reset P-Maintenance
<-- Select --> <-- Select -->
Select
Service Call
Beeper On/Off
<-- Select -->
<-- Select -->
Select
Access Code Drip-Out Mode
<-- Select -->
<-- Select -->
Select
or to choose the desired setting. Then press
reset and exit.
to set and exit.
Warmers Default
<-- Select -->
Select
1
Display Brew Time
<-- Select -->
Select
Display Messages
<-- Select -->
Select
Display Timers
<-- Select -->
Select
1
Visible only when model selected =
Gemini or Gemini-IF (Twin or Single)
2
Visible only when model selected =
GEMX (Twin or Single)
to set and exit.
to set and exit.
or
continued...
PG2
1,2
QT Alarm On/Off
<-- Select -->
Select
Satellite Color
<-- Select -->
Select
Server Lockout
<-- Select -->
Select
Exit
<-- Select -->
Press
or
®
INTELLIFRESH
to choose the desired
H