Table of Contents
Advertisement
OPERATING INSTRUCTIONS
Brewing Instructions
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during
brewing. Do not remove the brew basket while "Brewing" appears on the display.
NOTICE - Only use IntelliFresh satellites on IntelliFresh brewers.
The G3 Gemini Intellifresh
The brewer should be ON.
switch. "Ready to brew" should
be on the display. If the brewer
is connected to an inter-lock
grinder, the grinder should be
on. When inter-lock connection is
made, grind coffee at this time.
4
Fill with the proper amount of
amount of ground coffee. Level
change the settings, see the PROGRAMMING GUIDE section. When brewing starts, the warmer will come on.
Press the warmer button to turn the warmer off without turning off the brewer.
®
brewer is factory preset for optimal performance.
Place an empty IntelliFresh
satellite under the brew basket.
Make sure the satellite is pushed
all the way back against the front
cover and is making contact with
the electrical socket. For best
results, pre-heat the dispenser
the brew rails under the control
panel. Slide it all the way back
until it stops.
®
brew basket.
6
Press the brew button. Brewing
will begin immediately and the
warmer inside the satellite will
turn on automatically.
OI1
B
Advertisement
Table of Contents
