Table of Contents
Advertisement
iluminator B
illumination will occur or the seeing
of the sample image will be degraded.
Mount the P-ICI2 onto the zooming body
aligning the groove on the bottom of the
P-ICI2 main body with the positioning pin on
the zooming body while tilting the P-ICI2
toward the rear. Tighten the eyepiece tube
Note) When the other intermediate tube such
as a beam splitter is used together,
attach it on the P-IC12.
Screw in the 1/4 lambda plate to the end of
the objective. When the C-FIR ring fiber light
guide is used together, use the other 1/4
lambda plate C-LP separately available for
- ring fiber illuminator.
Insert the incident section of the light guide
into the light guide mount of the fiber
illuminator and tighten the clamp screw.
- Insert the luminous section of the light guide
- into the light guide mount of the P-ICI2 and
. tighten the clamp screw.
Luminous
>
section _
Advertisement
Table of Contents
