Table of Contents
Advertisement
CAUTION
The lamp and the surrounding area become very hot
during and immediately after using the illuminator.
Be careful not to burn yourself.
In addition, be sure
the lamp has cooled sufficiently before replacing a
lamp.
_ Pull the lamp socket from the lamp house and
G-LS
insert the lamp straight into the socket as far
< as it will go. Only use halogen lamps of the
"
_ specified rating.
- Next, attach the lamp socket to the lamp
house.
; Socket
(GE 787 6V-10W)
C-DSLS
Confirmation
window
Lamp |
©
(Philips JCR/M
6V-20W)
"Light
` į shielding tube
Holder mounting
|
i
' Socket
screwhole
;
_ Short protrusion
Note) Do not touch the glass part of a lamp with your bare hands as your
skin may burn and stick to the lamp, possibly reducing its level of
light output or causing damage to the lamp. When replacing a
Advertisement
Table of Contents
