Table of Contents
Advertisement
1 Photomicrographic magnification
[P-IBSS]
[P-IBSD]
Mount the beam splitter onto the zooming
body aligning the groove on the bottom of the
beam splitter with the positioning pin on the
zooming body while tilting the beam splitter
toward the rear. Tighten the eyepiece tube
- clamp screw.
Photomicrographic magnification = (PLI projection lens magnification)
x (Zoom magnification) x (Objective magnification)
e When the P-ICI2 Coaxial Episcopic Illuminator is used:
Photomicrographic magnification = (PLI projection lens magnification)
x (Zoom magnification) x (Objective magnification) x 1.5
e When the Plan Apo and ED Plan series objective for SMZ1000/800 is used:
Photomicrographic magnification = (PLI projection lens magnification)
x (Zoom magnification) x (Objective magnification) x 0.8
Attaching the beam splitter
Pin
D
SS
S
Mount it so as to position the port
at either the left or right.
P-IBSS
Port location
1) Mount it so as to position the
_____ Side port
rear port at the rear.
È
2) Attach the side port to the
beam splitter main body with
the positioning pin on the side
port fitted into the groove on
the beam splitter main body.
Tighten the side port clamp
screw.
P-IBSD
Attaching side port
Advertisement
Table of Contents
