WAGO 751-5201 Manual page 10

10 • 751-5201 [AS-Interface Module 4IN/4OUT 24V/2A Single]
Connectors
Warning
The inputs are DC coupled with the AS-Interface voltage. They shall not be
supplied with an external supply voltage!
Warning
Unused sensor or actuator connections must be sealed with protective caps!
2.1.1.3.3 Programming Connector
The PGM connection is the programming connector. It is a plug for a DC
socket, which is compatible with all popular programming adapters, for
example Pepperl+ Fuchs VAZ-PK-1.5M-V1-G.
Please note manufacturer documentation for the operation of the programming
device.
Warning
After use, the programming connector must be sealed again with a protective
cap!
WAGO-I/O-SYSTEM 751
AS-Interface Components IP67