Parts And Operating Components; Before First Use - Silvercrest 406544 2207 Operating Instructions And Safety Instructions

Parts and operating components

(See fold-out page for illustrations)
1
Blue LED
2
Red LED
3
On/Off switch
4
Clothes brush
5
Steam head
6
Steam button
7
Water tank release buttons
8
Water tank filler opening
9
Water tank lid
0
Water tank (with MAX marking to indicate maximum fill level)
q
Power cable (with mains plug)
w
Handle
Before first use
NOTE
► When you use the appliance for the first time, it might emit some smoke, a
harmless odour and a small amount of particles. This does not affect the
function of the appliance and does not last long.
To remove production-related residues from the heating and water circulation
system, fill the water tank
water tank
Hold the appliance over a washbasin or similar. In this way, the production
residues are flushed out of the pipes.
Then press the steam button again and use an old cloth to test whether
residues are still coming out of the steam openings.
If there are no more residues, the device is now ready for operation. If you
can still see particles on the cloth, repeat the above procedure.
SDMF 1300 B1
(flashes while heating up/remains on when ready for use)
0
with water and press the steam button until the
0
is approximately half empty (see section Operation).
GB │ IE │
7 ■