Parts And Operating Components; Before First Use - Silvercrest SDMF 1300 A1 Operating Instructions And Safety Instructions

Parts and operating components

(See fold-out page for illustrations)
Blue LED
1
Red LED
2
On/Off switch
3
Clothes brush
4
Steam head
5
Steam button
6
Water tank release buttons
7
Water tank filler opening
8
Water tank lid
9
Water tank (with MAX marking to indicate maximum fill level)
0
Power cable (with mains plug)
q
Handle
w

Before first use

NOTE
► When you use the appliance for the first time, it might emit some smoke, a
harmless odour and a small amount of particles . This does not affect the
function of the appliance and does not last long .
♦
To remove production-related residues from the heating and water circulation
system, fill the water tank
water tank
♦
Hold the appliance over a washbasin or similar . In this way, the production
residues are flushed out of the pipes .
♦
Then press the steam button again and use an old cloth to test whether
residues are still coming out of the steam openings .
♦
If there are no more residues, the device is now ready for operation . If you
can still see particles on the cloth, repeat the above procedure .
SDMF 1300 A1
(flashes while heating up/remains on when ready for use)
with water and press the steam button until the
0
is approximately half empty (see section Operation) .
0
GB │ IE │ NI │ CY │ 7 ■