7. INSTALLATION:
STEPS 7 through 9:
(See Diagram 6)
7.
Connecting 1/4" OD water supply tube to 1/4" quick connect fitting on the
back of the unit. Refer to Section 6 for instructions on how to properly
connect to quick connect fittings. IMPORTANT: Before connecting water
supply to dispenser, flush building water supply.
8.
Connect 1-1/2" OD drain pipe to Elbow Coupling (not provided). Connect to
building drain.
9.
Attach mounting brackets to a pallet or ground as necessary. No mounting
screws are included due to many possible mounting methods.
Rear View
Diagram 6
CONNECT WATER SUPPLY
CONNECT DRAIN
11