Using Standby (Windows 98 Second Edition) - Toshiba Portege 3490CT User Manual

162
Enhancing Productivity
Powering down the computer
Click OK again, then close the Control Panel.
8
NOTE: For more information about the Power Saver utility,
see
Starting again from Hibernation mode
To start up the computer from Hibernation mode, press the power
button until the on/off light turns green. The computer returns to
the screen you were using.
If you put the computer in Hibernation mode by closing the
display panel, you can start it again by opening the display panel.

Using Standby (Windows 98 Second Edition)

NOTE: Windows NT does not support the Standby
command. Use Suspend/Resume mode in its place.
To power down the computer using the Standby command, click
Start , Shut Down , select Stand by , then click OK .
Shut Down Windows dialog box
The computer saves the status of all open programs and files, turns
off the display, and goes into a low-power mode. The on/off light
blinks amber indicating the machine is in Standby mode.
"Using Power Management" on page 174.