Tsetup - Toshiba Portege 3490CT User Manual

❖
Keyboard — Allows you to configure the
emulation for an external keyboard.
❖
USB — Allows you to enable or disable USB Legacy
Emulation.
❖
PC Card — Allows you to change the PC Card controller
mode.
❖
LAN — Allows you to enable or disable Wake on LAN
❖
Serial— Allows you to configure the serial port default
settings.
By changing any of the options that appear in the dialog boxes and
clicking Apply , you can reconfigure that function. Any options
that you change will become default settings when you restart
your system.

TSETUP

TSETUP is much like Toshiba Hardware Setup, but it is
MS-DOS-based.
To access TSETUP during system boot:
Turn off the computer.
1
Hold down the
2
When you receive the message:
3
"Check system. Then press [F1] key"
To access TSETUP from Windows 98 Second Edition:
Click Start , Shut Down , select Restart the computer in
1
MS-DOS mode? and click Yes .
After the computer reboots in MS-DOS, type TSETUP at the
2
system prompt and press
To access TSETUP from Windows NT:
Hold down the
1
key and turn on the computer.
Esc
, press
.
Enter
key and turn on the computer.
Esc
Toshiba Utilities
TSETUP
function key
Fn
.
F1
173
.
®