Page 1 Double-click the desktop icon or visit the Web site: http://virtualtech.answerteam.com InTouch Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see C504-0501M1 ® e-support tool Center Chapter 8 on page 185 in this guide. TOSHIBA...
Page 2 AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR...
Page 3: Fcc Notice
NOTE: Only peripherals complying with the FCC Class B limits may be attached to this computer. Operation with non-compliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s parallel port, monitor port, USB port,...
Page 4: Type Of Service
This device must accept any interference received, including interference that may cause undesired operation. Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation, Toshiba American Information Systems, Inc. or an authorized representative of Toshiba.
Page 6 Instructions for IC CS-03 certified equipment NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
Page 7: Wireless Interoperability
Wireless Interoperability The Toshiba Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision B), as defined and approved by the Institute of Electrical and Electronics Engineers.
Page 8: Regulatory Information
Regulatory Information The Toshiba Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9: Interference Statement
Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
Page 10: Safety Instructions
Approved Countries for use This equipment is approved to the radio standard by the countries in Fig.1. Australia Canada Germany Japan New Zealand Switzerland Greece Poland Caution: Do not use this equipment except in the countries in Fig 1. CD-ROM, DVD-ROM, DVD-ROM/CD-RW Safety Instructions The CD-ROM, DVD-ROM, and DVD-ROM/CD-RW drives employ a laser system.
Page 11 Location of the required label (Sample shown below. Location of the label and manufacturing information may vary.) CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep it for your future reference.
Page 12 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 13 Satellite, Noteworthy, Fn-esse, and AccuPoint are registered trademarks, SecureSleep, SelectServ, FreedomWare, SmartMedia, Ask IRIS Online, and VirtualTech are trademarks, and InTouch is a service mark of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Microsoft, Windows, Windows Media, DirectX, and DirectShow are registered trademarks of Microsoft Corporation.
Page 14: Energy Star Compliance
This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse, or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org. ® partner, Toshiba has determined that this product is Energy...
Page 15: Table Of Contents
Contents Introduction... 23 This guide... 23 Safety icons... 24 Other icons used... 25 Other documentation... 25 Service options... 26 Chapter 1: Finding Your Way Around ... 27 Making sure you have everything... 27 Front with the display closed... 28 Back... 29 Right side...
Page 16 Selecting a place to work... 41 Creating a computer-friendly environment... 41 Keeping yourself comfortable... 42 Precautions... 45 Setting up your computer... 46 Installing additional memory (optional)... 47 Removing a memory module... 50 Connecting a mouse... 50 Connecting a printer... 50 Connecting the AC adapter...
Page 17 Using Hibernation... 87 Starting again from Hibernation mode... 87 Using Standby... 88 Starting again from Standby... 88 Chapter 4: Mobile Computing... 89 Toshiba’s energy-saver design... 89 Running the computer on battery power... 90 Using a second battery... 90 Battery safety precautions... 90...
Page 18 Maximizing battery life... 91 Charging batteries... 91 Charging the main and secondary batteries... 92 Charging the RTC battery... 92 Monitoring battery power... 93 Determining remaining battery power... 93 Conserving battery power... 94 What to do when the battery runs low... 95 Setting battery alarms...
Page 19 Lesson 11: Setting the date and time... 122 Lesson 12: Removing objects from the desktop... 123 Lesson 13: Using System Restore... 125 Lesson 14: If I am lost, what do I do?... 126 Windows Using the online tours and tutorials... 128 Lesson 15: Turning off your computer...
Page 20 The World Wide Web... 148 Surfing the Internet... 149 Internet features... 149 Uploading and downloading files from the Internet... 150 Toshiba’s online resources... 150 Conducting an electronic meeting ... 150 Sending a fax... 151 Exploring video features ... 152 Viewing presentations or DVD movies on your television ...
Page 21 Using playlists... 170 Creating playlists... 170 Loading and playing playlists... 172 Resuming normal playback after using playlists... 172 Customizing WinDVD... 172 Setting general properties... 173 Setting audio properties... 174 Setting display properties... 176 Customizing the control panel... 177 Using WinDVD Advanced Features... 177 Zooming in ...
Page 22 Using VirtualTech... 220 If you need further assistance... 221 Before you call... 221 Contacting Toshiba... 221 Other Toshiba Internet Web sites ... 222 Toshiba's worldwide offices... 223 Appendix A: Hot Keys... 227 Appendix B: Power Cable Connectors... 229 Glossary... 231...
Page 23: Introduction
Introduction Welcome to the world of powerful and portable multimedia computers! With your new Toshiba notebook computer, your work can accompany you wherever you go. Your Satellite Pro Series computer offers enhanced multimedia features and easy Internet access combined with great flexibility.
Page 24: Safety Icons
Safety icons If you are new to computers, or have not used a notebook computer before, read through the first couple of chapters to familiarize yourself with the components of the computer and how to turn it on. After that, seek out whatever interests you most. Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal...
Page 25: Other Icons Used
Guides for other programs that may come preinstalled on your computer and for additional programs on your Recovery and Configuration Builder CD. Toshiba Accessories Information lists accessories available from Toshiba and explains how to order them. The Microsoft system documentation which explains the features of the operating system.
Page 26: Service Options
Service options Service options Toshiba offers a full line of service options built around its SelectServ warranty programs. For more information, visit Toshiba’s Web site at Toshiba.com If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page...
Page 27: Chapter 1: Finding Your Way Around
Chapter 1 Finding Your Way Around This chapter presents a “grand tour” of your notebook computer. It serves as a reference when you need to locate specific parts of the computer. Making sure you have everything Before doing anything else, consult the Quick Start card provided with your system to make sure you received everything.
Page 28: Front With The Display Closed
Finding Your Way Around Front with the display closed Front with the display closed Modular Bay The display latch keeps the display panel closed and locked. To open the display panel, press the display latch and raise the panel. The Modular Bay comes with a CD or DVD drive installed. This bay can accommodate a CD-ROM, CD-R,CD-RW, DVD-ROM, or multifunction DVD-ROM/CD-RW drive.
Page 29: Back
Back Cooling vent DC-IN jack USB ports The cooling vent prevents the computer’s central processing unit (CPU) from overheating so that it can continue to perform at its maximum speed. CAUTION: To prevent possible overheating of the CPU, make sure you don’t block the cooling vents. The DC-IN jack is where you plug in the AC adapter.
Page 30: Right Side
Finding Your Way Around Right side The parallel port lets you connect a parallel printer or other parallel device, including ECP-compatible devices. The LAN port lets you connect the computer to a local area network using a 10/100 Ethernet link. The modem port lets you use a modular cable to connect the modem directly to a standard telephone line.
Page 31: Left Side
The PC Card ejection tabs release PC Cards from the corresponding slots. ® The i.LINK between the computer and an external device, such as a video camera. The USB (Universal Serial Bus) port allows you to connect USB peripherals, such as a mouse, printer or external keyboard to your computer.
Page 32: Front With The Display Open
Finding Your Way Around Front with the display open The 3.5 mm headphone jack lets you connect stereo headphones or other audio-output devices, such as external speakers. Connecting other devices automatically disables the internal speakers. The 3.5 mm microphone jack lets you connect an external monaural microphone or other audio input device.
Page 33 Finding Your Way Around Front with the display open sets the computer to turn on the CD/DVD player automatically if there is a disc in the DVD-ROM drive when the computer is ® turned off, or to power up and launch Windows Media Player.
Page 34: Indicator Panel
Finding Your Way Around Front with the display open Indicator panel The caps lock light glows when you press the When this light is on, pressing a letter key on the keyboard produces an uppercase (capital) letter. The cursor control mode light glows when the cursor control overlay is on.
Page 35: Cd Or Dvd Control Buttons
The hard disk drive light flashes green while the hard disk drive is being accessed. The Modular Bay/secondary battery light flashes green when the Modular Bay is in use. This light is also the indicator for a secondary battery, if one is seated in the Modular Bay. CAUTION: Never turn off the computer while any of the drives are in use.
Page 36: Cd/Dvd/Media Player Power Switch
Finding Your Way Around Front with the display open The next track button skips to the following track on the disc. Wi-Fi indicator light (for systems with Wi-Fi only)—The 802.11b (referred to as Wi-Fi glows amber when the Wi-Fi is turned on. For more information on wireless networking, see page 142.
Page 37 Finding Your Way Around Front with the display open DVD playback and the power switch With a DVD in the drive, setting the switch to the right turns on the ® computer and launches Windows Media Player as the default. To play a DVD you will need to manually start WinDVD.
Page 38: Underside
Finding Your Way Around Underside With nothing in the drive, setting the switch to the right turns on both the computer’s main power and the power to the sound system. When you open the display, Windows Media launches, and the sound system plays the default audio file. For more information, see page Underside...
Page 39 Finding Your Way Around Underside The battery release latch secures the battery cover to the computer, preventing the cover from dislodging from the computer case.
Page 40 Finding Your Way Around Underside — Blank Page —-...
Page 41: Chapter 2: Getting Started
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 42: Keeping Yourself Comfortable
AC power source, and let it dry out completely before turning it on again. If the computer does not operate correctly after you turn it back on, contact a Toshiba authorized service provider. Keeping yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers.
Page 43: Seating And Posture
If you use a paper holder, set it at about the same height and distance as the screen. Seating and posture When using your computer, maintain good posture with your body relaxed and your weight distributed evenly. Proper seating is a primary factor in reducing work strain.
Page 44: Work Habits
Getting Started Selecting a place to work extra back support. Lower-back-support cushions are available at many office supply stores. Sit with your back straight so that your knees, hips, and elbows form approximately 90-degree angles when you work. Do not slump forward or lean back too far. Lighting Proper lighting can improve the visibility of the display and reduce eyestrain.
Page 45: Precautions
working day. Finding ways to break up the routine can reduce stress and improve your efficiency. Take frequent breaks to change position, stretch your muscles, and relieve your eyes. A break of two or three minutes every half hour is more effective than a long break after several hours.
Page 46: Setting Up Your Computer
Getting Started Setting up your computer Be careful when you remove a PC Card that has been used for a long period. Avoid spilling liquids into the computer’s keyboard. If you do spill a liquid that gets into the keyboard, turn off the computer immediately.
Page 47: Installing Additional Memory (Optional)
Before starting to use your computer, you may also want to: Add more memory Connect a mouse Connect a full-size keyboard (see keyboard and mouse” on page Connect an external monitor (see keyboard and mouse” on page Connect a local printer Install PC Cards (see Installing additional memory (optional) Your computer comes with enough memory to run most of today’s...
Page 48 Getting Started Setting up your computer Unplug and remove any cables connected to the computer. Close the display panel and turn the computer upside down to locate the expansion memory slot cover. Base of a Satellite Pro 3000/3005 Series computer Using the standard Phillips no.
Page 49 Holding the memory module by its edges so that the gold connector bar faces the slot, fit the module into the socket. Gently press down on the memory module connector until the clips snap into place. Do not force the module into position. The memory module should be level when secured in place.
Page 50: Removing A Memory Module
Getting Started Setting up your computer Removing a memory module Follow steps 1 through 5 in (optional)” on page Gently pull up on the module to disconnect it, then gently pull it out of the slot. Complete the procedure by following steps 9 through 11. Connecting a mouse You may want to use a mouse instead of the computer’s built-in pointing device.
Page 51: Connecting The Ac Adapter
To connect a parallel printer: Connect the printer cable to the printer and to the computer’s parallel port. To the computer Identifying the ends of a parallel printer cable Plug the printer’s power cable into a live AC outlet. See your printer documentation for additional configuration steps, or see “Setting up a printer”...
Page 52 Getting Started Setting up your computer DANGER: Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable. If the power cable becomes damaged or the plug overheats, discontinue use.
Page 53: Charging The Battery
Connect the power cable to a live electrical outlet. The AC power and battery lights glow. CAUTION: Using the wrong AC adapter could damage your computer. Toshiba assumes no liability for any damage in such cases. The current rating for the computer is 3.16 amperes.
Page 54: Using The Computer For The First Time
Getting Started Using the computer for the first time NOTE: Battery life and charge time may vary depending on the applications, power management settings, and features used. Using the computer for the first time Opening the display panel Press the display latch and lift the display panel Opening the display panel CAUTION: To avoid damaging the display panel, don’t force it beyond the point where it moves easily.
Page 55: Turning On The Power
Turning on the power Check that all the drives are empty. If you have a printer connected to your computer, turn on the printer and wait until the printer indicates that it is ready (on line). Turn on the computer by pressing and releasing the power button located on the top of the keyboard.
Page 56: Using The Accupoint Ii Pointing Device
Getting Started Using the computer for the first time Using the AccuPoint II Pointing device The round button in the middle of the keyboard is the AccuPoint II pointing device. It enables you to move the cursor and to select items on the screen.
Page 57: Setting Up Your Software
Agreement and complete information about the operating system. You may be offered the opportunity to register the purchase of your computer with Toshiba. If not, make sure you register later by double-clicking the Registration icon on your desktop. Getting Started...
Page 58: Setting Up A Printer
Getting Started Setting up your software NOTE: To register online, your computer’s modem must be connected to a voice-grade telephone line, or to a Local Area Network. To register your computer at a later time, select No, I do not want to register at this time.
Page 59 Using the Add Printer Wizard To set up a printer with the Add Printer Wizard: Click the Start button, then point to Settings, and click Printers. The Printers window appears. Sample Printers window Double-click Add Printer. The Add Printer Wizard starts. Getting Started Setting up your software...
Page 60 Getting Started Setting up your software Sample Add Printer Wizard Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the Windows it automatically. You can ignore the remainder of this section.
Page 61: Turning Off The Computer
The Add Printer Wizard prompts you to enter a “friendly” printer name. Enter a name for your printer. HINT: If you are using more than one printer, make sure the name is descriptive enough to help you tell the difference. To set up the printer to be: The default printer for the Windows Edition operating system, click Yes.
Page 62: Caring For Your Computer
Cleaning the computer To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. CAUTION: Keep liquid, including cleaning fluid, out of the computer’...
Page 63: Moving The Computer
Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer or visit Toshiba’s Web site at Using a computer lock You may want to secure your computer to a heavy object such as your desk.
Page 64 Getting Started Caring for your computer Insert the cable’s locking end into the security lock slot located on the left side of the computer, then rotate the key a quarter turn and remove it. The computer is now securely locked to deter computer theft. Locking the computer...
Page 65: Chapter 3: Learning The Basics
Chapter 3 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 66: Using The Keyboard
Learning the Basics Using the keyboard Back up your files to diskettes (or other removable storage media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 67: Character Keys
Character keys Typing with the character keys is very much like typing on a typewriter, except that: The spacebar creates a space character instead of just passing over an area of the page. The lowercase l (el) and the number 1 are not interchangeable. The uppercase letter O and the number 0 are not interchangeable.
Page 68: Windows Special Keys
Learning the Basics Using the keyboard combination with the specific functions on the computer. ® Windows special keys ® Windows special keys The keyboard provides two keys that have special functions in the ® Windows operating system: The Windows The Application key has the same function as the secondary AccuPoint II control button (or right mouse button).
Page 69 Using the numeric keypad overlay To turn on the numeric keypad overlay, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Page 70: Starting A Program
Learning the Basics Starting a program Starting a program The easiest way to start a program is to click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows Explorer. If you prefer to open the program first, you have four options: Double-click the icon for the program on your desktop Use the Start menu...
Page 71: Printing Your Work
A new file, choose Save As from the File menu, type a name for the file, and click OK. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 72: Inserting And Removing Diskettes
Learning the Basics Using diskettes Diskette drive The Modular Bay/Secondary battery light glows when the diskette drive is in use. Inserting and removing diskettes Hold the diskette so that the arrow on its upper surface points toward the drive. Push the diskette gently into the drive slot on the left side of the computer.
Page 73: Backing Up Your Files
Keep diskettes at room temperature and avoid exposing them to direct sunlight. Otherwise data may be lost. Never place heavy objects on your diskettes. Never eat, smoke, or use erasers near your diskettes. Foreign particles can damage the diskette’s surface. Keep your diskettes away from sources of magnetism, such as speakers and radios, since these can destroy data.
Page 74: Using Your Cd Or Dvd Drive
Learning the Basics Using your CD or DVD drive Using your CD or DVD drive Your computer may have a CD-ROM drive, CD-R drive, CD-RW drive, DVD-ROM drive, or a DVD-ROM/CD-RW multifunction drive. CD-ROM drives can play back prerecorded CDs. DVD- ROM drives can play back both prerecorded CDs and DVDs.
Page 75 DVD-ROM drive components If you have a DVD-ROM drive, it may look like this: Drive in-use indicator light Eject button Manual eject hole Sample DVD-ROM drive CAUTION: Never press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive.
Page 76: Setting The Cd/Dvd/Media Player Switch To Cd/Dvd
Learning the Basics Using your CD or DVD drive CD/DVD control buttons The control buttons on the hinge bar of the computer enable you to play audio CDs when the computer is off. You can also use them to play CDs and DVDs when the computer is on. CD/DVD/Media Player switch CD or DVD control buttons on the hinge bar of the computer The previous track button returns to the preceding track on the...
Page 77: Setting The Cd/Dvd/Media Player Switch To Media Player
turns on the sound system only. The computer remains turned off. When you open the display, Windows Media If there’s a DVD in the drive, setting the CD/DVD/Media Player switch to the left (CD/DVD position), turns both the computer and the sound system on, and launches WinDVD.
Page 78 Learning the Basics Using your CD or DVD drive To locate the switch and button, refer to illustration labeled “CD or DVD control buttons on the hinge bar of the computer” on page The disc tray partially opens. CAUTION: To avoid damaging a disc or losing data, check that the disc activity light is off before opening the disc tray.
Page 79: Playing An Audio Cd
Gently press the center of the disc onto the spindle until it locks into place. Spindle Disc Positioning the disc on the spindle CAUTION: Make sure the disc is properly positioned on the spindle. If you position the disc incorrectly, it can jam the disc tray.
Page 80: Creating A Cd
Learning the Basics Using your CD or DVD drive Sample Windows Media Player screen The CD Player control panel works much like an ordinary compact disc player: To play the CD or to pause, click the play/pause button on the CD Player control panel.
Page 81: Playing A Dvd
Playing a DVD This manual has an entire chapter devoted to using WinDVD. For information about how to play back a DVD, see 2000” on page Viewing the contents of a CD or DVD CDs and DVDs contain files just like diskettes and the hard disk. CDs are often used to install software or store files that require lots of space, such as photographs and large presentation files.
Page 82: Removing A Disc With The Computer Off
Learning the Basics Setting up for communications Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. CAUTION: Never use a pencil to press the manual eject button.
Page 83: Using The Modem
The computer’s modem A telephone line A communications program To connect to the Internet, you need a Web browser, such as ® Microsoft Internet Explorer. TECHNICAL NOTE: Disable Call Waiting before you connect through the modem. Call Waiting interrupts data transmission.
Page 84: Powering Down The Computer
Learning the Basics Powering down the computer telephone number for the dial-up connection. To set up the network connection, use the Dial-Up Networking Wizard: Click Start and point to Programs. Point to Accessories, then to Communications, and click Dial-Up Networking. Enter the phone number of your network connection and let the program dial the number.
Page 85: Hibernation Command
When starting up again, the system does not automatically open programs and files you were previously using. Hibernation command Hibernation mode shuts the computer down completely, but it first saves the current state of the computer to the hard disk. Since Hibernation mode does not require power to maintain the saved information, the system settings are retained indefinitely.
Page 86: Using Shut Down
Learning the Basics Using Shut down so that, when you restart the computer, you can continue working from where you left off. Factors when choosing Standby: While in Standby mode, the computer uses some battery power. The battery will eventually discharge in Standby mode.
Page 87: Starting Again After Shut Down
In the Control Panel window, double-click the Power Management icon. If the Power Management icon is not present, click View all control panel options on the left side of the panel. The Power Management Properties dialog box appears. Click the Advanced tab, and select the options you want. When I close the lid of my portable computer Set this option to Power Off to have the computer shut down when you close the display panel.
Page 88: Using Standby
Learning the Basics Using Standby If you put the computer in Hibernation mode by closing the display panel, you can start it again by pressing and releasing the power switch. Using Standby To power down the computer using the Standby command, click Start, Shut Down, select Stand by from the menu, then click The computer saves the status of all open programs and files to memory, turns off the display, and goes into a low-power mode.
Page 89: Chapter 4: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you...
Page 90: Running The Computer On Battery Power
Mobile Computing Running the computer on battery power Running the computer on battery power The computer contains a removable lithium ion (Li-ion) high-capacity battery that provides power when you are away from an AC outlet. You can recharge it many times. In addition, the computer has an internal real-time clock (RTC) battery.
Page 91: Maximizing Battery Life
Store spare batteries in a cool dry place out of direct sunlight. NOTE: For optimum DVD performance, Toshiba recommends that you play DVDs while running on AC power rather than on battery power.
Page 92: Charging The Main And Secondary Batteries
Mobile Computing Charging batteries Charging the main and secondary batteries To charge the main battery, plug the computer into a live wall outlet. It takes several hours to charge the battery with the computer off. It takes much longer to charge the battery while the computer is on.
Page 93: Monitoring Battery Power
charge completely, especially if you have had the computer turned off for a long time. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working. To recharge the RTC battery, plug in the computer and leave it turned off for at least 24 hours.
Page 94: Conserving Battery Power
Whether you use any optional devices to which the battery supplies power, such as a PC Card Where you are working—since operating time decreases at low temperatures Toshiba’s power-saving options greatly increase the length of time you can use the computer before it becomes necessary to recharge the battery.
Page 95: What To Do When The Battery Runs Low
Toshiba has combined these options into three preset power usage modes: Long Life Normal High Power To change the power usage mode, hold down both the keys. What to do when the battery runs low When the battery runs low you can Plug the computer into an external power source and recharge the battery.
Page 96: Changing The Main Battery
Mobile Computing Changing the main battery reached. You can set how the warning occurs: sound an alarm, display a message, both, or none. You can also set the computer to enter Standby mode or Hibernation mode, or to Shutdown when the alarm goes off.
Page 97: Disposing Of Used Batteries Safely
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. The materials that came with your computer may include an insert regarding the disposal of batteries. If not, check with your local government agency for information on where to recycle or dispose of old batteries.
Page 98 Mobile Computing Traveling tips Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, compact discs and diskettes. Contact your authorized Toshiba representative for more information.
Page 99: Chapter 5: Getting To Know The Windows Millennium Edition Operating System
Chapter 5 Getting to Know the Windows Millennium Edition Operating System This chapter introduces the Windows operating system by guiding you through a few basic tasks. If you have used the Windows will find the Windows familiar, since both operating systems are similar. Whether you have used a Windows confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons.
Page 100: Lesson 1: Exploring The Desktop
Getting to Know the Windows Millennium Edition Operating System Lesson 1: Exploring the desktop Lesson 1: Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows Millennium Edition operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 101: Start Button
Recycle Bin. For more information on the Recycle Bin, see Windows online Help. Internet Explorer—The Microsoft browser that provides access to the Internet. Toshiba VirtualTech—A Toshiba utility to help answer technical questions and troubleshoot system problems. For more information about VirtualTech, see page 220.
Page 102: System Tray
Getting to Know the Windows Millennium Edition Operating System Lesson 1: Exploring the desktop Open recently accessed documents Adjust system settings Search for files Access Windows Help and Support Run programs Suspend system activity and shut down the computer For more information on starting programs, see Starting programs”...
Page 103: Windows Millennium Edition File System
Getting to Know the Windows Millennium Edition Operating position the cursor over the icon for a few moments and a short description of the task appears. Typical tasks in the System tray are Current time, Power usage mode, and speaker volume. To activate a specific task, double-click the appropriate System tray icon.
Page 104 Getting to Know the Windows Millennium Edition Operating System Lesson 2: Using the AccuPoint II screen and performing computing tasks. This lesson lets you practice using the AccuPoint II pointing device. Move the pointer to the Start button, then click the primary button (the larger one) to open the Start menu.
Page 105 Getting to Know the Windows Millennium Edition Operating Sample desktop with the My Computer window open Now click the Close button in the upper-right corner of this window. The My Computer window closes. Click an empty area of the taskbar at the bottom of the screen and, while holding down the primary button, use the pointing device to drag the pointer to the right edge of the desktop, then release the primary button.
Page 106: Lesson 3: Learning About The Internet
Getting to Know the Windows Millennium Edition Operating System Lesson 3: Learning about the Internet Sample desktop with the taskbar on the right HINT: You can move the taskbar to any of the desktop’s four edges. Click the taskbar once again and drag it back to the bottom of the desktop.
Page 107: Exploring The Web Tutorial
Getting to Know the Windows Millennium Edition Operating Exploring the Web Tutorial Microsoft’s Web Tutorial can answer questions about the Internet. Click on the Connect to the Internet icon on your desktop. The Internet Connection Wizard appears. Follow the Wizard’s steps to connect. In Internet Explorer, click Help.
Page 108: Lesson 4: Creating A New Document
Getting to Know the Windows Millennium Edition Operating System Lesson 4: Creating a new document The Browser controls provide various navigation features. The Internet address, also called a Uniform Resource Locator (URL), is a line of information telling the browser where to look for a specific Web page.
Page 109: Lesson 5: Creating A New Folder
Getting to Know the Windows Millennium Edition Operating System Lesson 5: Creating a new folder Title bar Sample Notepad window Notice that when the document opens, there is a new button on the taskbar that reads My New File- Notepad (the name may be too long to fit into the taskbar space but, if you point to the name, the complete name is visible).
Page 110: Lesson 6: Starting Programs
Getting to Know the Windows Millennium Edition Operating System Lesson 6: Starting programs The Windows documents and programs in folders. It even stores other folders in folders. In this lesson, you will create a folder in which to store your new document. Move the pointer to an empty area of the desktop, then click the secondary button.
Page 111 Getting to Know the Windows Millennium Edition Operating This lesson teaches you how to launch programs from the Start menu, using two of the programs that are built into the Windows Millennium Edition operating system: Paint and Windows Explorer. Click Start, then point to Programs. The operating system displays a list of program folders.
Page 112: Lesson 7: Resizing, Repositioning, And Hiding Windows
Getting to Know the Windows Millennium Edition Operating System Lesson 7: Resizing, repositioning, and hiding windows Sample Windows Explorer open on the desktop Notice the taskbar now has two buttons on it—one for Paint and one for Windows Explorer. Click the Paint button on the taskbar. The operating system displays the Paint program.
Page 113: Using The Taskbar
Getting to Know the Windows Millennium Edition Operating Lesson 7: Resizing, repositioning, and hiding windows windows by removing them from the desktop without actually closing your document or program. This lesson introduces several ways to adjust the size, shape, and position of windows open on the desktop.
Page 114: Minimizing And Maximizing Windows
Getting to Know the Windows Millennium Edition Operating System Lesson 7: Resizing, repositioning, and hiding windows Maximize windows Close windows Choose your option depending on how you wish to set up your desktop. Minimizing and maximizing windows To make the Windows Explorer window the active window, click the Windows Explorer button on the taskbar.
Page 115: Resizing And Moving Windows
Getting to Know the Windows Millennium Edition Operating Lesson 7: Resizing, repositioning, and hiding windows Resizing and moving windows Click the Restore button in the top-right corner of the Paint window. Paint returns to its previous size and location. Notice that the Restore button has changed back into the Maximize button.
Page 116: Lesson 8: Closing Programs
Getting to Know the Windows Millennium Edition Operating System Lesson 8: Closing programs Lesson 8: Closing programs Once you are finished working with a document or program, it is a good idea to close it. While you can run several programs at the same time, having a large number of programs and documents open simultaneously can slow down your computer.
Page 117: Creating A Shortcut To The Character Map
Getting to Know the Windows Millennium Edition Operating The operating system displays the desktop shortcut menu. Click New, then click Shortcut. The operating system displays the Create Shortcut dialog box. Sample Create Shortcut dialog box In the Command line box, type Next.
Page 118 Getting to Know the Windows Millennium Edition Operating System Lesson 9: Creating shortcuts Sample Search options on the Start menu Click Files or Folders. The operating system displays the Search Results dialog box.
Page 119 Getting to Know the Windows Millennium Edition Operating Sample Search Results dialog box HINT: Search also allows you to perform searches on the Internet. Type in the Search for files or folders named: text box, char and then click Search Now. The operating system displays a list of all the files with “char”...
Page 120: Lesson 10: Changing The Screen Saver
Getting to Know the Windows Millennium Edition Operating System Lesson 10: Changing the screen saver Clicking a shortcut icon opens the program or folder immediately. You can place as many shortcuts on your desktop as you find useful. HINT: The Character Map is a useful tool when you want to add a special character to a document.
Page 121 Getting to Know the Windows Millennium Edition Operating The operating system opens the Display Properties dialog box. Sample Display Properties dialog box Click the Screen Saver tab. Click the arrow beside the current option—probably “(None)”—to open the screen saver list box. Scroll through the screen saver options by clicking the scroll arrows in the list box.
Page 122: Lesson 11: Setting The Date And Time
Getting to Know the Windows Millennium Edition Operating System Lesson 11: Setting the date and time The next lesson explains how to set two other properties—the date and time. Lesson 11: Setting the date and time You initially set the computer’s date and time properties when you turned the computer on for the first time and set up the Windows Millennium Edition operating system.
Page 123: Lesson 12: Removing Objects From The Desktop
Getting to Know the Windows Millennium Edition Operating Set the correct month, year, day, and time. Click the Time zone drop-down list box and set your time zone. Click OK. Continue with the next lesson to finish cleaning up the desktop. Lesson 12: Removing objects from the desktop Earlier in this tutorial, you created a new icon on the desktop.
Page 124 Getting to Know the Windows Millennium Edition Operating System Lesson 12: Removing objects from the desktop Sample Recycle Bin open on the desktop To completely remove an object, select it, and then click File, Delete. The object is permanently deleted from the Recycle Bin. Later on—in your real work, not in this tutorial—you will use the Recycle Bin to delete other objects such as folders, documents, and sometimes even programs.
Page 125: Lesson 13: Using System Restore
Getting to Know the Windows Millennium Edition Operating To delete everything from the Recycle Bin at once, choose Empty Recycle Bin from the File menu. HINT: Empty the Recycle Bin periodically. Even though an item is moved to the Recycle Bin, it still uses valuable space on the hard disk drive until it is deleted from the Recycle Bin.
Page 126: Lesson 14: If I Am Lost, What Do I Do
Getting to Know the Windows Millennium Edition Operating System Lesson 14: If I am lost, what do I do? The Windows through the process of storing your system settings for future use. It also guides you through restoring your system to the selected date or time.
Page 127 Getting to Know the Windows Millennium Edition Operating Sample Help and Support Index The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index. Type pictures Notice as you type that the index moves to locate what you...
Page 128: Using The Online Tours And Tutorials
Getting to Know the Windows Millennium Edition Operating System Lesson 14: If I am lost, what do I do? Sample Drawing help window Click the Click Here link. The operating system opens the Paint program. Not every Help topic contains a hot link to start the program it is talking about.
Page 129: Lesson 15: Turning Off Your Computer
Getting to Know the Windows Millennium Edition Operating introduction to the new features in the Windows Edition operating system. Sample Windows window To start a Windows Click Help, then click Tours and tutorials. The Microsoft Tours and tutorials section. Scroll through the list of Tours and tutorials and select the place you want to start.
Page 130 Getting to Know the Windows Millennium Edition Operating System Lesson 15: Turning off your computer lesson teaches you how to shut down the operating system and turn off your computer. Click Start, then click Shut Down. The operating system displays the Shut Down Windows dialog box.
Page 131: Chapter 6: Exploring Your Options
Chapter 6 Exploring Your Options In this chapter, you will explore other features of your notebook computer. ® Windows Millennium Edition special features The Windows several new features and enhancements, including: New system file protection A system restore function, allowing you to rollback the system to its previous mode An improved help center, support automation, and automatic Windows update...
Page 132: Personalizing Your Desktop
Exploring Your Options Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: Taskbar—which resources to display for quick access Active Desktop always display Desktop style—how windows are displayed and how to...
Page 133: Bringing The World To Your Desktop
Bringing the world to your desktop With the Windows can set up your desktop with complete World Wide Web integration at a single click. As Microsoft Desktop interface lets you put ‘active content’ from Web pages or a channel on your desktop. You can make your desktop truly your own space by adding the active items you refer to on a regular basis: news, weather, sports, stock prices or whatever you want to have at hand.”...
Page 134: Changing Desktop And Browsing Style
Exploring Your Options Personalizing your desktop To browse the Active Desktop Gallery for more components to add, click Visit Gallery. In order to browse, an active Internet connection must be established. To select some other Web site, type the address of the Web site you want or click Browse to locate it.
Page 135 Working in Web style You can work in Web style if you prefer to organize and browse your computer using these Web-like options: Single-click to browse the desktop and folder. You click only once to open an item, just as you click a Web link to jump.
Page 136: Personalizing Individual Windows
Exploring Your Options Personalizing your desktop Choosing a style To select the desktop style and browsing option: On the desktop, double-click My Computer. The My Computer window appears. On the Tools menu, click Folder Options. The Folder Options dialog box appears. Sample Folder Options Click the style you want to use, then click OK.
Page 137: Adding A Background To A Window
Adding a background to a window If you select art or a Web page as a window background, set your desktop style to Web style—or select the As Web Page option from the View menu. To add a background to a window: Open the window you want to customize.
Page 138 Exploring Your Options Personalizing your desktop Address bar Quick Launch Sample toolbar locations The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Standard buttons Description Opens Web pages, programs, folders, or documents.
Page 139: Displaying A Toolbar In A Window
Toolbar element Quick Launch Displaying a toolbar in a window On the desktop, double-click My Computer. The My Computer window appears. On the View menu, point to Toolbars, then click the name of the toolbar you want to display. The toolbar appears below the menu bar of the current window.
Page 140: Connecting A Monitor, Keyboard And Mouse
Exploring Your Options Connecting a monitor, keyboard and mouse Sample Control Panel window as a Web page The addition of the name of the folder and instructions for how to use the folder on the left give the window the appearance of a Web page.
Page 141: Using The Programmable Buttons
Using the programmable buttons Your computer has two programmable buttons on the indicator panel. They are the AP button and the Internet button. Pressing the AP button will bring up the Ez Button application. Pressing the Internet button will open Microsoft Explorer.
Page 142: Using The Ethernet Lan Port
Exploring Your Options Using the Ethernet LAN Port Mute Selecting Mute will mute the sound system. Task Switch Selecting Task Switch toggles between open applications. Selecting the Application Launch will display a list of applications to choose from. You may select any of the application options to assign to your buttons, or you may select your own by using the Browse button.
Page 143: Accessing A Lan
Wi-Fi. Do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. When using your Wi-Fi Mini PCI module, your computer may display a PC Card icon in the desktop’s system tray to indicate that it is in use.
Page 144: Setting Up A Dial-Up Connection
Exploring Your Options Exchanging data with another computer You can use the system tray’s PC Card icon to turn off your Wi-Fi Mini PCI module. However, you will need to restart your computer to turn it back on. Setting up a dial-up connection To set up a dial-up connection, use the Dial-Up Networking Wizard: Click Start and point to Programs.
Page 145: Transferring Files Using The Infrared Port
Transferring files using the Infrared port Getting started Connect the cable. Load the transfer program on both computers. Set any specific options. Start the transfer. When you have finished transferring files, close the programs on both computers. Getting help Click Start, then Help. Choose the Index tab.
Page 146: Making The Physical Connection
Exploring Your Options Connecting to the Internet Making the physical connection You can connect to the Internet by using a telephone and modem or through other higher-speed communication methods, such as Digital Subscriber Lines (DSL), cable, and satellite link. Using a modem If you’re using a modem, you connect the modem to one of the computer’s COM (communications) ports.
Page 147: Signing Up With An Internet Service Provider
sections of your modem and Windows documentation. Click OK to close the Modem Properties dialog box. Close the Control Panel. Signing up with an Internet Service Provider An Internet Service Provider (ISP) is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection.
Page 148: Using The Internet
Exploring Your Options Using the Internet Using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: The Internet The World Wide Web Surfing the Internet Internet features Uploading and downloading files from the Internet For more information about the Internet, see Learning about the Internet”...
Page 149: Surfing The Internet
Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet.
Page 150: Uploading And Downloading Files From The Internet
File Transfer Protocol (FTP) features of your Web browser to transfer large amounts of data. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 151: Sending A Fax
A record of each transaction is maintained in a list or archive so you know exactly what you sent to others, or received from them. TECHNICAL NOTE: Toshiba recommends that you start the SPANworks 2000 application after closing all other applications. This will ensure system resources are available...
Page 152: Exploring Video Features
Exploring Your Options Exploring video features On the desktop, double-click the RingCentral icon. If the icon is not on the desktop, click Start, then Programs. Go to the RingCentral The RingCentral Setup Wizard appears. Select Next and follow the instructions on the screen. Exploring video features Your computer’s video features include: Viewing Windows...
Page 153 To connect a device to the S-video out port, you’ll need an S-video cable (not included with your system). For the best video quality, always use a properly shielded cable. NOTE: Before connecting the device, make sure that it is ready to receive S-video input.
Page 154 Exploring Your Options Exploring video features Changing the display properties setting Right-click anywhere on your desktop and select Properties. The Display Properties dialog box appears. Sample Display Properties dialog box Click the Settings tab. Slide the Screen area slider bar toward Less until the setting reads 640 x 480.
Page 155: Transferring And Editing Video Data
Click OK. Open the DVD tray and insert DVD title. The DVD movie should play automatically. Transferring and editing video data The i.LINK port on the right side of the computer provides very fast data transfer rates (up to 400 Mbps or 400 million bits per second).
Page 156: Exploring Audio Features
Exploring Your Options Exploring audio features Fit the DVD-ROM drive in the Modular Bay, if necessary. Place the VideoCD in the DVD-ROM drive. Launch WinDVD 2000 and press the Play button. Audio volume controls Repeat Sample WinDVD control panel with playback controls called out HINT: There are no menus for VideoCD 1.0 titles.
Page 157: Using A Microphone
microphone jack and using the Sound Recorder feature in the operating system. DEFINITION: A .wav (pronounced “wave”) file is the Windows system. Using a microphone Connect an external microphone to the computer. To locate the microphone port, see Click Start, point to Programs, Accessories, Entertainment, then click Sound Recorder.
Page 158: Adjusting Recording Quality
Exploring Your Options Exploring audio features Adjusting recording quality The better the quality of the recording, the more disk space the sound file requires. Experiment to find a balance that fits your needs. Open Sound Recorder, if necessary (click Start, point to Programs, Accessories, Entertainment, then click Sound Recorder).
Page 159: Using Pc Cards
Adjust the volume: For external speakers, use the volume controls on each speaker. For headphones, use the computer’s volume control dial. Using PC Cards PC Cards expand your computer’s capabilities and usefulness. You can purchase additional PC Cards from your dealer. Most PC Cards conform to the PCMCIA (Personal Computer Memory Card International Association) standard.
Page 160: Inserting Pc Cards
Exploring Your Options Using PC Cards Inserting PC Cards If your PC Card does not support hot swapping, save your data and turn off the computer before inserting the PC Card. For more information, see Hold the PC Card with the arrow side up and the connector side toward the slot.
Page 161: Hot Swapping
Hot swapping One of the great things about PC Cards is that you can replace one PC Card with another while the computer is on. This is called “hot swapping.” Hot swapping precautions Although you can insert a PC Card at any time, to avoid data loss never remove a card while it is in use.
Page 162: Removing A Smartmedia Card
Exploring Your Options Emulating a full-size keyboard Removing a SmartMedia card Press the card inward to release it. The card pops out slightly. Lift the side of the computer, grasp the card, and pull it straight out. Emulating a full-size keyboard Although the computer’s keyboard layout is compatible with a standard full-size keyboard, it has fewer keys.
Page 163: Chapter 7: Windvd 2000
Chapter 7 WinDVD 2000 WinDVD is a software program for playing back CDs, VideoCDs and DVDs. This chapter explains how to use this program. Playing DVDs TECHNICAL NOTE: For optimum DVD performance, always play DVDs while your computer is connected to AC power. For systems with a DVD-ROM or DVD-ROM/CD-RW multifunction drive, you can use InterVideo WinDVD ™...
Page 164 WinDVD 2000 Playing DVDs DVD-ROM/CD-RW multifunction drive, your computer comes with WinDVD preinstalled. WARNING: Before playing a DVD, turn down the volume. Playing the disc at maximum volume could damage your ears. See page 167 Fit the DVD-ROM or DVD-ROM/CD-RW drive into the Modular Bay.
Page 165: Using The Windvd Toolbar
Sample WinDVD video window with the control panel Using the WinDVD toolbar The WinDVD window contains a toolbar at the top and a status bar at the bottom. If the toolbar or status bar does not appear, you can display them by following the instructions in properties”...
Page 166: Using The Windvd Control Panel
WinDVD 2000 Playing DVDs backward or move it to the right to go forward. The current time slot is indicated on the right side of the status bar. The playback speed slider enables you to control the speed at which the DVD plays. Move the slider to the left to slow the playback speed or move it to the right to play the DVD faster.
Page 167: Using The Control Panel Playback Buttons
WinDVD 2000 Playing DVDs You can open a shortcut menu, by positioning the cursor over the WinDVD window, other than over the control panel, then clicking the secondary button. The shortcut menu contains the same features as the control panel, plus the enable caption feature, which displays captions for the hearing impaired.
Page 168 WinDVD 2000 Playing DVDs Click this To do this Repeat — repeat the current chapter, if the DVD contains chapters. Otherwise this button repeats the DVD from the begin- ning. When the repeat button is activated, the repeat symbol appears to the left of the chapter number on the control panel counter.
Page 169: Maximizing The Video Window
Click this Maximizing the video window To close the WinDVD control panel and expand the video window to fill the screen, click the Maximize button. To do this Fast reverse — move quickly backward through the DVD con- tent. When you reach the desired location, click the play button to resume playing the DVD.
Page 170: Using Playlists
WinDVD 2000 Using playlists To display the control panel again, double-click anywhere in the video window. Using playlists TECHNICAL NOTE: The DVD author determines what features the DVD supports. Depending on the DVD format and your computer’ s hardware configuration, some of the control panel features may be unavailable when playing a DVD.
Page 171 Sample Playlist window Click the File button in the lower-right corner of the window, to indicate that you are creating a playlist of individual files. In the Directory list, select the file you want to play first, and click Add to put it at the top of the playlist. DVD files have an .mpg, .vob or .ac3 file name extension.
Page 172: Loading And Playing Playlists
WinDVD 2000 Customizing WinDVD Click OK to close the confirmation dialog box, then click OK to close the Playlist window. Loading and playing playlists In the Playlist window, click File to display the saved playlist of files. Click Load Playlist to load the saved playlist. After loading the playlist, a confirmation dialog box appears.
Page 173: Setting General Properties
Sample Properties dialog box with the General tab on top Setting general properties You use the General tab to select the region code, the drive letter assigned to the DVD-ROM drive, the autoplay default option, and which WinDVD toolbars are displayed by default. Region coding is part of the protection system for DVD content.
Page 174: Setting Audio Properties
WinDVD 2000 Customizing WinDVD The Remaining times until permanent box displays the remaining number of times you can change the current region before the setting becomes permanent. In the Player settings Default DVD drive box, select your DVD-ROM drive letter. Select the Player settings Auto play check box to enable the auto play feature.
Page 175 Sample Properties dialog box with Audio tab on top. In the Audio channels box, select the appropriate speaker mode to match your setup as follows: If you have two speakers, select one of the 2 speaker modes. Mono mixes the audio channels into one channel.
Page 176: Setting Display Properties
WinDVD 2000 Customizing WinDVD In the Vocal options box, select the desired option for DVDs that support vocal as follows: No vocal does not output vocals to any speaker. Left vocal outputs vocals to left speakers only. Right vocal outputs vocals to right speakers only. Both outputs vocals to both left and right speakers.
Page 177: Customizing The Control Panel
Select the Lock aspect ratio check box to maintain the original aspect ratio when the video window is resized. Otherwise clear the check box. Select the Startup in full screen mode check box to automatically start WinDVD each time with the video window maximized and the control panel hidden.
Page 178 WinDVD 2000 Using WinDVD Advanced Features Playback speed slider WinDVD expanded control panel Use this Directional buttons Brightness slider Audio tracks To do this Playback speed— control the speed at which the DVD plays. Move the slider to the left to slow the playback speed or move it to the right to play the DVD faster.
Page 179 Using WinDVD Advanced Features Use this Directional buttons — use to navigate the WinDVD menus, as you would the arrow keys on the keyboard. The center button represents Numeric keypad — use these buttons to select a chapter by entering the chapter number.
Page 180 WinDVD 2000 Using WinDVD Advanced Features Use this To do this Chapter button — displays a list of all the chapters in the current DVD. Select the chapter you want to play, or use the numeric keypad to enter the chapter number. Title button —...
Page 181 Using WinDVD Advanced Features Use this Subtitles — displays a list of all the available language subtitles. This button is enabled only for DVD content that includes subtitles and supports dynamic subtitle information changes. Select the desired language, or select Default subtitles in the DVD’s default language.
Page 182: Zooming In
WinDVD 2000 Using WinDVD Advanced Features Use this Zooming in You can zoom in on an area of the WinDVD video window to get a closer look. Click the Zoom button, located in the upper-left corner of the directional button panel. Position the cursor over the top-left corner of the area you want to view in close up.
Page 183: Panning
Panning Once you are zoomed in on an area of the WinDVD video window, you can move the zoom window location using the pan feature. With the video window in zoom mode, click the pan button, located in the lower-right corner of the directional button panel.
Page 184: Launching An Internet Browser From Windvd
WinDVD 2000 Launching an Internet browser from WinDVD Move the Color control 1 slider to the right to increase the blue and decrease the yellow color values. Move the slider to the left to increase the yellow and decrease the blue color values. Move the Color control 2 slider to the right to increase the red and decrease the green color values.
Page 185: Chapter 8: If Something Goes Wrong
Toshiba’s support tool, VirtualTech, to help diagnose and solve possible problems. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 186 If Something Goes Wrong Problems that are easy to fix To close a program that has stopped responding: Press Ctrl The operating system displays the Close Program dialog box. This box lists all the programs and processes currently in operation. If a program has stopped responding, the words “not responding”...
Page 187: Problems When You Turn On The Computer
Open Notepad (click Start, point to Programs, then point to Accessories and click Notepad). Press Ctrl Notepad. Add a paragraph break and type some notes describing what you were doing when you received the message. Save the file and refer to it when you contact the software manufacturer.
Page 188: The Windows Millennium Edition Operating
If Something Goes Wrong The Windows The computer is not accessing the hard disk or the diskette drive. Your computer normally loads Windows from the hard disk. If you have a hard disk problem, you will not be able to start the computer.
Page 189: Using Startup Options To Fix Problems
® The Windows Millennium Edition operating system is not working Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the ®...
Page 190: Safe Mode
If Something Goes Wrong The Windows Logged (Bootlog.txt) Selecting Logged starts the operating system under normal conditions and creates a hidden startup log file named C:\Bootlog.txt. This file records every step of the system’s startup process. You or a qualified Windows system expert can use this log file to check the loading and initializing of device drivers.
Page 191 ® The Windows Millennium Edition operating system is not working Other problems may involve a device driver. See Millennium Edition operating system can help you” on page 193 to fix the problem. TECHNICAL NOTE: The Windows operating system automatically starts in Safe mode if it detects that system startup failed or the Registry (the file that defines how the operating system is set up) is corrupted.
Page 192: Internet Problems
If Something Goes Wrong The Windows with some programs and device drivers. The same holds true for the System.Ini and Win.Ini files. TECHNICAL NOTE: Programs and devices that are backward compatible are designed to work with older operating systems and other programs. For example, many features of the Windows backward compatible with earlier versions of the operating system.
Page 193: The Windows Millennium Edition Operating System Can Help You
® The Windows Millennium Edition operating system is not working My browser can’t find a site I bookmarked. The World Wide Web is constantly changing. A site you bookmarked yesterday may not be available today or its server may be down for temporary repair. Try again later. ®...
Page 194: Resolving A Hardware Conflict
If Something Goes Wrong Resolving a hardware conflict Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using Windows Millennium Edition Help to troubleshoot the problem first. For help on hardware conflicts: From the Help menu, double-click on Troubleshooting.
Page 195: Plug And Play
If Something Goes Wrong Resolving a hardware conflict Interrupt Request Channel The channel to the CPU is called an Interrupt Request (IRQ) because it interrupts what the processor is doing and requests some of the processor’s time. If two or more devices use the same IRQ, the processor does not know which device is asking for attention.
Page 196: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict Resolving conflicts There are three things you can do to resolve hardware conflicts: Disable the device. For an older device, remove it from the computer. For a Plug and Play device, see Manager”...
Page 197: Checking Device Properties
In the General section of the dialog box, check the box next to Disable in this hardware profile. Click OK. Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device.
Page 198: Memory Card Problems
If Something Goes Wrong Resolving a hardware conflict Memory card problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, then click Shut Down. Select Shut down, then click OK. The operating system shuts down and turns off the computer automatically.
Page 199 The AC power light does not come on when you plug in the AC adapter and power cable. Make sure the AC adapter and power cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.
Page 200: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict The battery appears not to power the computer for as long as it usually does. If you frequently recharge a partially charged battery, it may not charge fully. Let the battery discharge completely, then try charging it again.
Page 201: Accupoint Ii Problems
Nothing happens when you press the keys on the external keyboard. The computer may not recognize your USB keyboard. Removing the USB cable and reinserting it into the computer should make the computer recognize the keyboard. The keyboard locks and the computer will not restart. Make sure the power is on and press the reset button.
Page 202: Display Problems
If Something Goes Wrong Resolving a hardware conflict After cleaning the cap, position it on the peg and press it into place. NOTE: The peg is square, so be careful to align the cap’ s hole with the peg. Display problems Here are some typical display problems and their solutions: The display is blank.
Page 203 Press priority is not set for the built-in screen. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the AccuPoint II secondary button, then clicking Properties. This opens the Display Properties dialog box. The Appearance tab of this dialog box allows you to choose the colors for the screen.
Page 204: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode.
Page 205 Your hard disk seems very slow. If you have been using your computer for some time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, point to Programs, Accessories, System Tools, and click Disk Defragmenter. Your data files are damaged or corrupted.
Page 206: Cd-Rom Or Dvd-Rom Drive Problems
If Something Goes Wrong Resolving a hardware conflict If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette. The drive cannot read a diskette. Try another diskette.
Page 207 Some discs run correctly, but others do not. If the problem is with an application CD-ROM, refer to the software’s documentation and check that the hardware configuration meets the program’s needs. The color of the materials used to make the disc can affect its reliability.
Page 208 If Something Goes Wrong Resolving a hardware conflict Select the Settings tab, click the DMA check box, then click The system must be restarted for this setting to take effect. The Root or Title menu does not open. Most DVD titles have one or both of the “Root” and “Title” menus.
Page 209: Minimum System Requirements
If you have installed new hardware (such as a new graphics card or audio card), ensure the component’s drivers support ® Microsoft DirectX the manufacturer of the component. Verifying that your display driver resolution, color depth and refresh rate are optimal for DVD playback. (Some systems do not support video overlays if these parameters are not optimal.) Try lowering these settings to improve performance.
Page 210 If Something Goes Wrong Resolving a hardware conflict WinDVD software WinDVD: Error messages This table offers descriptions and resolutions for error messages that may appear when using WinDVD. Error message and additional information The disc in the DVD-ROM drive is not a valid disc type. Valid disc types are DVD-Video, Video CD, and audio CD.
Page 211 Error message and additional information WinDVD cannot display the selected resolution due to system limitations. The screen size exceeds the allowable display limit. There are not enough system resources to play the DVD at the selected setting. The audio settings are incorrect. Please check sound card or drivers.
Page 212 If Something Goes Wrong Resolving a hardware conflict Error message and additional information WinDVD does not support this version of the DVD specification. This DVD disc cannot be played in this region. The selected region cannot be used due to one of the following: The Region Code of WinDVD and the DVD disc do not match.
Page 213: Sound System Problems
Error message and additional information This file appears to contain unsupported data. The drive or disc cannot be found. This may be caused by one of the following: No disc in the DVD-ROM drive. No DVD-ROM drive. A disc of an unsupported type in the DVD-ROM drive.
Page 214: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager. Most PC Card problems occur during installation and setup of new cards.
Page 215: Resolving Pc Card Problems
“Using PC Cards” on page 159 Cards. Make sure all cables are securely connected. Make sure the computer is loading only one version of Card and Socket Services. Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine.
Page 216 If Something Goes Wrong Resolving a hardware conflict Since all PC Cards share the same socket, each card is not required to have its own address. Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: Click the PC Card icon on the taskbar.
Page 217: Printer Problems
If Something Goes Wrong Resolving a hardware conflict If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems: The printer will not print.
Page 218: Modem Problems
If Something Goes Wrong Develop good computing habits The printer will not print what you see on the screen. Many programs display information on the screen differently from the way they print it. See if your program has a print preview mode.
Page 219 Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See page 65 for instructions.
Page 220: Using Virtualtech
To load an update, click yes. Run a detailed system report that harvests and compiles your system’s hardware and software information. This report is also accessible to Toshiba’s InTouch Center technicians to reference when you place a call or send a question electronically.
Page 221: If You Need Further Assistance
Consult the dealer from whom you purchased your computer and/or program. Your dealer is your best source for current information. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you.
Page 222: Other Toshiba Internet Web Sites
If Something Goes Wrong Other Toshiba Internet Web sites Next, try one of Toshiba’s online services. The Toshiba Forum can be accessed through CompuServe go toshiba Toshiba voice contact Before calling Toshiba, make sure you have: Your computer’s serial number.
Page 223: Toshiba's Worldwide Offices
Carrera 129, Nro. 2957 Parque Industrial de Occidente Bodega 30 - Zona Fontibón Santa Fe de Bogotá, Colombia If Something Goes Wrong Toshiba's worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V.
Page 224 If Something Goes Wrong Toshiba's worldwide offices Denmark Scribona Danmark A/S Naverland 27 DK2600 Glostrup Denmark France Toshiba Systèmes (France) S.A. 7, Rue Ampère 92804 Puteaux Cédex France Greece Ideal Electronics S.A. 109 Syngrou Avenue 176 71 Kalithea Athens Greece...
Page 225 Escalera A 28831 (Madrid) San Fernando de Henares Spain If Something Goes Wrong Toshiba's worldwide offices New Zealand Toshiba (New Zealand) Pty. Limited Level 4, 3 Ferncroft Street Grafton Auckland New Zealand Papua New Guinea Fujitsu (PNG) Pty. Ltd. P.O. Box 4952 Boroko...
Page 226 If Something Goes Wrong Toshiba's worldwide offices Switzerland Ozalid AG Herostrasse 7 8048 Zürich Switzerland United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park...
Page 227: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Instant password security To resume working, if you have registered a user password, press type your password and press...
Page 228: Display Modes
Hot Keys Sound Sound volume levels. The alarm volume options are: Off, Low, Medium, and High. Off is always first. Display modes mode options. The display mode options are: Built-in display panel only, Built-in display panel and external monitor simultaneously, External monitor only, Built in display panel and TV (or other external video device) simultaneously, and TV (or other external video device) only.
Page 229: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 230 — Blank Page —-...
Page 231: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. alternating current BIOS basic input/output system bits per second compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS...
Page 232 Glossary Acronyms DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 233 SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 234 Glossary Terms application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 235 byte — A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory.
Page 236 Glossary Terms controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU — See central processing unit (CPU). CPU cache —...
Page 237 disk drive — The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette — A thin, flexible disk in a protective jacket that stores magnetically encoded data.
Page 238 Glossary Terms executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device — A device that connects to a computer to expand its capabilities.
Page 239 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 240 Glossary Terms keyboard shortcut — A key or combination of keys that you use to perform a task instead of using a pointing device such as the AccuPoint. kilobyte (KB) — A unit of data equal to 1024 bytes. See also byte. L1 (level one) cache —...
Page 241 MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem — Short for “modulator/demodulator.” A device that converts information from digital to analog and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.
Page 242 Glossary Terms parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device.
Page 243 RAM (random access memory) — Volatile memory that can be written to as well as read. By volatile, we mean that information in RAM is lost when you turn off your computer. This type of memory is used for your computer’s main memory. See also memory. Compare ROM.
Page 244 Glossary Terms Standby — A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. Suspend — A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again.
Page 245: Index
Index AC adapter AC power light Accessories programs AccuPoint II cleaning control buttons not working pointing device using Active Desktop adding background to a window memory alarms low battery Application Launch Ask IRIS Online audio CDs playing audio features avoiding injury battery alarms changing...
Page 246 Index Bootlog.txt file browser buttons AccuPoint II CD controls CD or DVD controls CD Player DVD-ROM drive eject next track PC Card eject play/pause power previous track programmable Start stop calculator caps lock light Card and Socket Services CD and DVDs caring for inserting removing...
Page 247 problem solving removing computer cleaning lock moving non-system disk or disk error message not accessing disk drives placement protection running on battery power setting up startup files transferring information turning off turning on using at the office warning resume failure message will not restart work area...
Page 248 Index Digital Subscriber Lines (DSL) Digital Versatile Discs DirectShow DirectX Foundation Disk Defragmenter disk drive corrupted/damaged data files missing files/trouble accessing a disk running slow diskette drive can’t insert a diskette can’t read a diskette diskettes caring for cleaning copying files to inserting and removing display doesn’t look normal/flickers...
Page 249 problem with display settings/current settings not working with hardware program has performed an illegal operation warning resume failure WinDVD Ethernet 10/100 Ethernet LAN adapter Ethernet LAN Port disabling using expansion memory slot cover external microphone connecting external monitor connecting not working external speakers Ez Button FAT (File Allocation Table)
Page 250 Index My Computer naming safety indicator light Wi-Fi indicator panel keyboard system infrared port inserting CDs and DVDs PC Cards installing main battery memory modules Internal/External mode Internet bookmarked site not found browser chat rooms connecting to downloading files news groups overview slow connection uploading files...
Page 251 memory adding problem solving removing removing expansion slot cover memory module inserting removing microphone jack Microsoft Internet Explorer Microsoft Support Online Web site Microsoft Windows Millennium Edition minimizing modem determining the COM port FCC requirements port problem solving modem, using modes Safe monitor...
Page 252 CD/DVD can’t insert diskette in drive can’t read a diskette changing display properties checking device properties compact discs not running correctly computer hangs when PC Card inserted computer will not power up contacting Toshiba corrupted/damaged data files Device Manager...
Page 253 disabling a device disk drive is slow display is blank DVD-ROM controls are gray drive tray doesn’t eject not functioning properly performance is poor Root or Title menu does not open slow playback video content poor enabling the USB-FDD Legacy Emulation option external display not working external keyboard not...
Page 254 Index Windows won’t start WinDVD error messages programmable buttons programs closing not running correctly starting Web browsers properties recharging main battery RTC battery recording adjusting quality sounds Recovery and Configuration Builder CD Recycle Bin region code remaining battery power removing CDs and DVDs main battery PC Cards...
Page 255 WinDVD System Restore System Setup System Tools system tray taskbar telephone line text file tips on computing toolbars Toshiba trademarks transferring files transferring information between computers traveling tips troubleshooters turning computer on/off tutorials Uniform Resource Locator (URL) URL (Uniform Resource...
Page 256 SelectServ wav files recording Web address Web browsers Web sites Support Online Web sites,Toshiba Web style Wi-Fi indicator light on/off switch wireless networking windows Windows Explorer Windows Help Windows Media Player Windows Millennium Edition...
Page 257 error messages help Internet browser, launching not functioning properly performance is poor playing DVDs playlists properties, audio properties, display region codes Root or Title menu does not open slow playback starting status bar system requirements toolbar video content poor video window, maximizing zoom WinDVD 2000 wireless networking...
Page 258 — Blank Page —-...

This manual is also suitable for:

Satellite 3005-s303 Satellite 3005-s403 Satellite 3005 series Satellite 3000 series

Toshiba Satellite 3000-S353 User Manual

Chapter 1: Finding Your Way Around

Chapter 2: Getting Started

Chapter 3: Learning the Basics

Chapter 4: Mobile Computing

Chapter 5: Getting to Know the Windows Millennium Edition Operating System

Chapter 6: Exploring Your Options

Chapter 7: Windvd 2000

Chapter 8: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cable Connectors

Quick Links

Related Manuals for Toshiba Satellite 3000-S353

Summary of Contents for Toshiba Satellite 3000-S353