Connecting A Ps/2 Mouse; Using A Ps/2 Mouse And The Accupoint Ii Simultaneously - Toshiba Portege 3490CT User Manual

Connecting a PS/2 mouse

HINT: You can only connect one PS/2 device at a time,
unless you use an optional Y-cable. Using a Y-cable allows
you to connect a PS/2 mouse and a PS/2 keyboard
simultaneously.
Turn off the computer.
1
Attach the LAN Port Replicator to the computer. See
2
"Attaching the LAN Port Replicator" on page
Connect the mouse cable to the PS/2 port on the LAN Port
3
Replicator.
Locating the PS/2 port on the LAN Port Replicator
Turn on the computer.
4
Windows automatically detects the mouse.
See your mouse documentation for additional information.

Using a PS/2 mouse and the Accupoint II simultaneously

With a PS/2 mouse, you can choose to have the AccuPoint II
active at the same time. You set this option in Toshiba Hardware
Setup:
Click Start , point to Settings , and click Control Panel .
1
Double-click Toshiba Hardware Setup .
2
Click the Pointing Devices tab.
3
Under Pointing Devices Options, select one of:
4
Expansion Options
Using a mouse
PS/2 port
113
103.