Using A Mouse; Connecting A Serial Mouse; Connecting A Usb Mouse; Connecting A Ps/2 Mouse - Toshiba TE2000 User Manual

164
Expansion Options

Using a mouse

Using a mouse
If you prefer, you can use a mouse instead of the computer's built-
in pointing device–the AccuPoint II. You can use a PS/2-
compatible mouse, a serial mouse or a USB mouse.
TECHNICAL NOTE: A serial mouse disables the
AccuPoint II. With a PS/2 mouse, you can choose to have
the AccuPoint II active at the same time.

Connecting a serial mouse

To connect a serial mouse, connect the mouse cable to the serial
port at the back of the computer. Once connected, the mouse is
ready to use.
Refer to your mouse documentation for configuration information.

Connecting a USB mouse

To connect a USB mouse, connect the mouse cable to the USB
port on the computer. Once connected, the mouse is ready to use.

Connecting a PS/2 mouse

CAUTION: Make sure the computer is off before you attach
the mouse. Connecting a PS/2 mouse with the computer's
power on can damage the mouse, the computer, or both.
If you are connecting a mouse after you have started using the
computer, begin at step 1. Otherwise proceed to step 2.
1 Click Start, Turn Off Computer, then select Turn Off.
The operating system shuts off the computer.