Table of Contents
Advertisement
Installation
During installation, make sure that the lettering "right
above" is upside down at the bottom left of both panels.
Insert the lower panel at an angle towards the back
1.
(fig. A).
Slide in the middle panel (fig. B).
2.
Stick the retaining clips onto the right and left-hand
3.
side of the panel, aligning them so that the retaining
carriers are over the screw holes, and then screw
into place (fig. C).
Hook the seal in to the bottom of the panel again
4.
(fig. D).
Insert the uppermost panel at an angle to the back
5.
into the brackets. Take care not to push the seal to
the back (fig. E).
Insert the two small seals on the left and right of the
6.
panel again (fig. F).
Put the cover back in place and screw it on.
7.
Attach the oven door.
8.
Do not use the oven again until the panels have been
correctly installed.
Additional door safety
When preparing meals with long cooking times, the
oven door can reach very high temperatures.
Supervise small children and keep them away from the
oven when the oven is in operation.
Additional safety devices have been fitted to prevent
contact with the oven door. Always attach these safety
devices when children could come near the oven.
You can purchase this optional accessory (11023590)
from the after-sales service.
Appliance door
en
37
Advertisement
Table of Contents
