Table of Contents
Advertisement
Programme duration
Your appliance will automatically calculate how long the
programme you have set is going to take. The
programme duration will be displayed once you have
set the weight for your chosen programme.
You cannot change the duration of a programme.
Extending the cooking time
Once the programme and the audible signal stop, you
can touch the
button to set a new cooking time. The
@
appliance will resume heating using the programme
settings.
You can extend the cooking time as many times
Note:
as required.
If the food has been cooked to your liking, switch the
appliance off by turning the function selector to the "Off"
position.
Setting a later end time
With some programmes, you can set a later end time.
Before starting, touch the
symbol is highlighted on the display. Use the
to delay the end time.
The appliance switches to standby after it is started.
Changing and cancelling
Once the appliance is started, the programme number
and the weight cannot be changed.
The end time can be changed while the appliance is on
standby.
If you would like to cancel the programme, switch the
appliance off by turning the function selector to the "Off"
position.
button until the "End"
v
button
@
Tested for you in our cooking studio
JTested for you in our
cooking studio
H ere, you can find a selection of dishes and the ideal
T e s t e d f o r y o u i n o u r c o o k i n g s t u d i o
settings for them. We will show you which type of
heating and temperature are best suited to your dish.
You will get information on suitable cooking
accessories and the height at which they should be
placed in the oven. You will also get tips about
cookware and preparation methods.
A lot of steam can build up in the cooking
Note:
compartment when cooking food.
Your appliance is very energy-efficient and radiates very
little heat to its surroundings during operation. Due to
the significant differences in temperature between the
appliance interior and the external parts of the
appliance, condensation may build up on the door, the
control panel or the front panels of adjacent kitchen
cabinets. This is a normal physical phenomenon.
Condensation can be reduced by preheating the oven
or opening the door carefully.
General information
Recommended setting values
The table lists the optimal heating function for various
types of food. The temperature and cooking time
depend on the amount of food and the recipe.For this
reason, the table specifies setting ranges. Try using the
lower value to start with. A lower temperature will result
in more even browning. You can increase the
temperature next time if necessary.
Cooking times cannot be reduced by using
Note:
higher temperatures. The food would only be cooked
on the outside, but would not be fully cooked in the
middle.
The setting values apply to food placed in the cooking
compartment while the cooking compartment is still
cold. This will save energy.If you preheat the oven, you
can reduce the indicated baking times by several
minutes.
Preheating is necessary for selected types of food –
this is indicated in the table. Do not place your food and
accessory into the cooking compartment until it has
finished preheating.
If you wish to follow one of your own recipes, you
should use the settings listed in the table for similar
food as reference. Additional information can be found
in the baking tips listed after the settings tables.
Remove any accessories that are not being used from
the cooking compartment. This will allow you to achieve
optimal cooking results while saving energy.
Hot air gentle heating function
Hot air gentle is an intelligent heating function that
allows you to gently cook meat, fish and baked items.
The appliance optimally controls the supply of energy to
the cooking compartment. The food is cooked in
phases using residual heat. This means that it remains
more succulent and browns less. Depending on the
en
43
Advertisement
Table of Contents
