Oven Door - Additional Safety Precautions; Troubleshooting; Fault Table - Siemens HU233510M Instruction Manual

Free standing cooker
Table of Contents

Advertisement

Detaching the door
Open the oven door fully.
1.
Fold up the two locking levers on the left and right (figure A).
2.
Close the oven door as far as the limit stop. With both hands,
3.
grip the door on the left and right-hand sides. Close the door
a little further and pull it out (figure B).
Attaching the door
Reattach the oven door in the reverse sequence to removal.
When attaching the oven door, ensure that both hinges are
1.
inserted straight into the opening (figure A).
The notch on the hinge must engage on both sides (figure B).
2.

Troubleshooting

Malfunctions often have simple explanations. Refer to the table
before calling the after-sales service as you may be able to
remedy the fault yourself.

Fault table

If a dish does not turn out as well as you had hoped, refer to
the chapter: Tested for you in our cooking studio.It contains
useful tips and information on cooking, baking and roasting.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out by one of our trained after-sales engineers.
Fold back both locking levers (figure C). Close the oven
3.
door.
:
Risk of injury!
Risk of injury. If the oven door falls out accidentally or a hinge
snaps shut, do not reach into the hinge. Call the after­sales
service.

Oven door - Additional safety precautions

During long cooking times, the oven door may become very
hot.
If you have small children, extra supervision is required during
oven operation.
In addition, there is a protective device (protective grid) which
prevents direct contact with the oven door. You can purchase
this optional accessory (469088) from the after-sales service.
Fault
Possible cause Troubleshooting/informa-
The oven does
Faulty circuit
not work.
breaker
Power cut.
Oven not hot.
Dust on the
contacts.
The burner
Power cut or
does not ignite.
damp ignition
plugs.
The gas grill
The protecting
does not work.
plate is incor-
rectly inserted.
tion
Look in the fuse box and
check that the circuit
breaker is in working order.
Check whether the kitchen
light or other kitchen appli-
ances are working.
Turn the control knobs
clockwise and anti-clock-
wise a few times.
Light the gas burner with a
gas lighter or a match.
Make sure that the protect-
ing plate is correctly
inserted.
Remove the protecting
plate and reinsert it.
19

Advertisement

Table of Contents
loading

Table of Contents