Table of Contents
Advertisement
12.2 Directory Structure
The directory structure on the USB drive can be viewed on your PC, and will look as follows:
•
GPR Data
•
FINDAR
o Export01
o Exportxx
Each successive export of data will create a new directory called ExportXX, where XX is
incremented by 1 from the previous directory. The actual GPR data files are all contained in a
.GPZ file. This can be opened by the EKKO_Project™ software.
If data was collected with GPS (internal or external), a .KMZ file is also generated. This contains
positional information and can easily be opened in Google Earth
If any Field Interpretations were added during data collection, these are saved in a .CSV file. This
is a spreadsheet file, which shows the positional information of any interps made.
The System Info folder contains an APP.LOG file and a system summary diagnostic report. The
APP.LOG file contains important information about system operation and may be requested by
Sensors & Software to help troubleshoot any issues.
▪
Project1
•
Screen Shots
o All Screenshots as .JPG files
•
Project1.GPZ file
•
Project1.KMZ file
•
Field Interp Report.CSV
▪
Project2
•
Screen Shots
o All Screenshots as .JPG files
•
Project2.GPZ file
•
Project2.KMZ file
•
Field Interp Report.CSV
▪
System Info
▪
Projectx
•
Screen Shots
o All Screenshots as .JPG files
•
.GPZ file
•
.KMZ file
•
Field Interp Report.CSV
▪
System Info
TM
.
95
Transferring Data to a PC
Advertisement
Table of Contents
