Table of Contents
Advertisement
Transferring Data to a PC
show up in EKKO_Project™ as depth slices (you will need an additional module to view them) –
see
Section
12.3.
Figure 12-3: Insert a USB memory stick into the USB port on the Display Unit to export data.
Alternatively, if you want to export the data later, you can select No for the time being. Later on,
when you are ready to export your data, from the main menu select Setup > File Management
and press Export Data
(Section
4.3.4)
12.1 Formatting USB Sticks
There may be times when a USB stick is not recognized by the LMX200™. In this case, you
may need to format the USB stick. Ensure that it's formatted as FAT/FAT32 (NTFS will not
work). Also ensure that there are no hidden or write-protected partitions on the USB drive.
If the problem persists after formatting, try another USB stick.
94
Advertisement
Table of Contents
