Table of Contents
Advertisement
System Information is the only option in System Test which is not actually a test. Here
information such as the version, serial numbers, temperature and battery power are displayed.
(Figure 4-11). Pressing Export will just export a System Summary Report with this information
to a USB stick. The Export button is greyed out, unless a USB stick is currently inserted.
There is an option called Anonymous Usage Statistics. When this is set to ON and the user is
connected to a wireless network, any system malfunctions will trigger an automatic notification
to Sensors & Software. This is to help with gathering information about any system
irregularities. As the name suggests, the notification is completely anonymous and no personal
information is sent.
Pressing Clear User Data will delete all saved GPR data, e-mail addresses, system
configurations and preference settings. A message window will pop up asking you to confirm
deletion. Press Yes to proceed with deletions or No to cancel (Figure 4-12).
Note: Clear User Data essentially wipes the system clean. Upon reboot, it will run the Setup
Wizard, similar to when it's used the first time or after re-installing the firmware.
4.2.2 Keypad
The keypad test ensures that all buttons on the membrane keypad are working. Press Start to
begin the test which requires the user to press each button once, within a 20 second timeframe
(Figure 4-13).
Figure 4-12: Warning message after pressing Clear User Data
36
Tools & Setup
Advertisement
Table of Contents
