Table of Contents
Advertisement
Grid Scan
7 Grid Scan
Grid scans are conducted to generate depth slices over a given area. This is useful for locating
all known and unknown objects, as well as their orientation, in a graphical manner that is easy
to interpret.
From the main menu (Figure 3-2), press the Grid Scan button to enter the Grid setup menu.
7.1 Grid Parameters
The screen in Figure 7-1 will allow you to set parameters of the grid, before data acquisition
begins.
Figure 7-1: Grid Scan setup
7.1.1
Grid Number
To select a grid number, press the + and - buttons under Grid Number at the bottom of the
screen. Alternatively, pressing the grid number button itself will show the screen in Figure 7-2.
From here, you can go directly to any grid. Grids that contain no data will have some text and
grid lines shown in green, whereas grids containing data will have the text and grid lines shown
in red. Grids that are partially complete will show the uncollected lines in green on the right side.
67
Advertisement
Table of Contents
