Table of Contents
Advertisement
Tools & Setup
4.3.2 Delete Project
Pressing this will delete the currently selected project. There is a confirmation window asking if
you are sure; press Yes to continue deleting, press No to cancel.
4.3.3 Map View
Pressing this will display a map view for all the data (lines & grids) in a given Project (Figure
4-28). For collected grids, Map View is enabled if a GPS (internal or external) was on during
data collection. However, for lines, Map View will only be enabled if an external GPS was used.
Map View shows the survey path travelled, as well as any flags or interpretations added to the
data. Map View is fully explained in
Section
9.
Figure 4-28: Map View showing two grids and a long line with interpretations. Map View is enabled because the data
was collected with GPS.
4.3.4 Export Data
Screenshots and data are always saved to the internal memory of the Display Unit. If a USB-
drive (memory stick) is inserted into the USB port on the Display Unit, pressing the Export Data
button will copy all the data files to the USB-drive. If no USB-drive is inserted, this option will
not be accessible.
Data can also be exported anytime a USB drive is inserted into the USB port, regardless of what
menu you are in. This is further explained in
Section
12.
46
Advertisement
Table of Contents
