Table of Contents
Advertisement
12
Transferring Data to a PC
Data can be exported to a PC by inserting a USB drive into the USB port (Figure 12-1).
Figure 12-1: Insert a USB memory stick into the USB port on the Display Unit to export data.
Once the USB drive is recognized, a message will appear telling you that a drive has been
inserted and if you wish to export your data to it (Figure 12-2). Click Yes.
Figure 12-2: When a USB drive is connected to the Display Unit, a message opens asking if you would like to export
all your data to it. Select Yes to transfer immediately. If you select No, you can export the data later by going to the
If there are grids that were collected, but not processed, it will alert you after you select Yes to
exporting the data (Figure 12-3). This is important, as unprocessed grids will not automatically
Setup > File Management menu option.
93
Transferring Data to a PC
USB-memory
stick
Advertisement
Table of Contents
