Table of Contents
Advertisement
There are several parameters that can be modified. Touch the screen and swipe up or down to
scroll and view additional parameters. To change a value, press the value on the right side of
the screen. Alternatively, use the up and down arrows on the 4-way keypad to highlight the
desired parameter, then press Edit. Each parameter is described in detail below.
4.1.1
Language / Locale
Selecting this option will display the screen in Figure 4-3. The current language is displayed;
pressing the + and – buttons on either side of the language will cycle between the languages
currently available. Below that, the Country/Region is displayed. Press the + and – buttons on
either side of the displayed Country/Region to alphabetically move to the next or previous
country or region.
Alternatively, both Language and Country/Region can be changed by pressing the + and –
buttons on the bottom of the screen. Press Back when you are done.
4.1.2
Units
Pressing Units will cycle between US Standard and Metric Units.
4.1.3
Date/Time
Selecting this option takes you to a screen where the date and time can be set. The time is
manually set and will not automatically correct for daylight savings time.
4.1.4
Volume
Scroll bar for adjusting the volume of clicks and beeps heard during operation. This can also be
changed by using the Swipe Down menu
data.
Figure 4-3: Changing Language and Country/Region
(Section
26
3.4) anytime the system is not collecting
Tools & Setup
Advertisement
Table of Contents
