Table of Contents
Advertisement
D862 User Manual
LED indicators
Call indicator
The bright-red LED situated on the top right corner of the phone indicates incoming, ongoing, held,
and missed calls. LED status indications:
•
Blinking rapidly when a call is coming in.
•
Glowing steadily when dialing, when in a call, and when you have missed a call. To turn the LED
off after a missed call, press the right arrow
menu and simultaneously turn off the LED.
•
Blinking slowly when you have put a call on hold.
Function key LEDs
SmartLabel keys P1–P32
Depending on the function mapped onto the key, the red or green LEDs on the key will be activated
when the key event occurs. The factory setting is red LED and "line". The LEDs of a line key will:
•
blink rapidly when a call is ringing on the line;
•
glow steadily when there is an ongoing call on the line;
•
blink slowly when a call is on hold on the line;
•
be off when the line is free.
When other functions are mapped onto the keys, the LEDs may glow or blink. For example: When
the "extension" function has been mapped onto a key and monitoring of extensions is enabled on both
phones, the LED will
•
blink rapidly when a call is ringing on the extension;
•
glow steadily when the extension is busy;
•
be off when the extension is not busy
MWI key
: Has a red LED that lights up when there is a new message on the mailbox.
Mute key
: Has a red LED that lights up when and as long as the microphone is muted.
Speakerphone
speakerphone or headset mode, respectively, are turned on.
and headset
keys: Have green LEDs that light up when and as long as
on the navigation key to view the Missed calls
20
Getting to Know Your Phone
Advertisement
Table of Contents
