Hard Drive; Removing The 2.5/3.5-Inch Hard-Drive Caddy - Dell OptiPlex 5090 Small Form Factor Service Manual

Steps
1. Align and insert the front-cover tabs with the slots on the chassis.
2. Rotate the front cover towards the chassis and snap it into place.
Next steps
1. Install the side cover.
2. Follow the procedure in

Hard drive

Removing the 2.5/3.5-inch hard-drive caddy

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the 2.5/3.5-inch hard-drive caddy and provide a visual representation of the
removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 19