Table of Contents
Advertisement
Table 19. Connection (continued)
Options
Wireless Device Enable
Enable UEFI Network Stack
Wireless Radio Control
HTTP(s) Boot Feature
HTTP(s) Boot Feature
HTTP(s) Boot Modes
Power
This section provides power details and settings.
Table 20. Power
Options
USB Wake Support
Enable USB Wake Support
AC Behavior
76
System setup
Description
● Disabled - The internal LAN is off and not visible to the
operating system.
● Enabled - The internal LAN is enabled.
● Enabled with PXE (Selected by defauly) - The internal LAN
is enabled with PXE boot capabilities.
This section contains a toggle switch that allows the user to
enable or disable WLAN and Bluetooth on the computer. The
options are as follows:
● WLAN (Enabled by default).
● Bluetooth (Enabled by default).
This section contains a toggle switch that allows the user to
enable or disable installation of UEFI networking protocols.
(ON by default)
This section contains a toggle switch that allows the user
to enable or disable a feature where the system will sense
a connection to a wired network and disable the WLAN or
WWAN connection (OFF by default).
This section contains a toggle switch that allows the user to
enable or disable HTTP(s) Boot capabilities (ON by default).
● Auto Mode - HTTP(s) Boot automatically extracts Boot
URL from DHCP(Dynamic Host Configuration Protocol) -
Selected by default.
● Manual Mode - HTTP(s) Boot reads Boot URL provided by
the user.
This section also contains an "Upload" and "Delete" option for
provisioning of the certificates required to connect to HTTPs
Boot server.
Description
This section contains a toggle switch to allow the user to
enable or disable USB Wake Support. It allows the system
to use USB devices like a mouse and keyboard to wake the
system from standby mode (OFF by default).
NOTE:
This feature only works if the power adapter is
connected to the system.
This section allows the user to control the behavior of the
system when power is restored after an unexpected loss of
power. The options here are:
● Power Off - System stays off after AC power is restored
(Selected by default)
Advertisement
Table of Contents
