Installing The Optical Drive (3.5-Inch); Removing The Sd Card Reader - Dell OptiPlex 3046 - Mini Tower Owner's Manual

Installing the optical drive (3.5-inch)

1 Insert the optical drive into the optical drive bay until it clicks into place.
2 Connect the data cable and power cable to the connectors on the optical drive.
3 Install the:
• bezel
• cover
4 Follow the procedure in

Removing the SD card reader

1 Follow the procedure in
2 Remove the:
• cover
• bezel
3 Open the front bezel
4 To remove the SD card reader:
a Disconnect the SD card reader cable from the connector on the system board [1].
b Remove the screw that secures the SD card reader to the computer [2].
c Lift the SD card reader out of the computer [3].
After Working Inside Your
Before Working Inside Your
door.
Computer.
Computer.
Removing and installing components 11