Memory Modules; Removing The Memory Modules - Dell OptiPlex 5090 Small Form Factor Service Manual

Steps
1. Insert the coin-cell battery into its slot on the system board with the positive side (+) label facing up.
2. Press down and snap the coin-cell battery into the slot on the system board.
Next steps
1. Install the graphics card.
2. Install the side cover.
3. Follow the procedure in

Memory modules

Removing the memory modules

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the 2.5/3.5-inch hard-drive
4. Remove the hard-drive and optical-drive
NOTE: CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the
components on the memory module.
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
after working inside your
before working inside your
caddy.
bracket.
computer.
computer.
Removing and installing components 43