TESY CH 1760 1T IX Instructions For Use And Maintanence page 6

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
EN
Figure 2 – Dimensions of SL 1760 1T IX
Figure 3 – Drawing of the installation holes
Figure 4 – Drawing of the mounting bracket for the
range hood
Figure 5 – Drawing of the mounting bracket for the
chimney bodies
Fixing the mounting bracket and the range hood to the
wall:
Mark on the wall and drill at least 2 holes (preferably
the outer ones) with diameter Ø8 for the mounting
bracket for the range hood.
Place the plastic wall plugs in the holes.
Fix the bracket to the wall with the screws.
Tighten the screws completely.
Hang the appliance on the bracket.
Mark the lower holes.
6
Instructions for use and maintenance
Take the appliance off the bracket.
Drill 2 holes with diameter Ø8 mm and place the
plastic wall plugs in the holes.
Hang the appliance on the bracket.
Tighten the screws in the lower holes to fix the
appliance to the wall. Make sure that the range
hood is fixed firmly to the wall.
Mark the slots for the both mounting brackets for
chimney bodies according the height You need.
Keep in mind that the bracket for the lower chimney
body is longer than the one for the upper chimney
body.
Drill the holes and place the plastic wall plugs in
the holes.
Fix the brackets to the wall with screws.
Connect the flexible aluminium pipe to the outlet
of the range hood and to the chimney, taking into
account that the bends and curves reduce the
absorption power, so they should be reduced to the
minimum.
Ensure that the connection will not get loose when
the appliance operates at maximum power.
Install the chimney bodies and fix them with screws.
Figure 6 – mounting the range hood
RISK OF ELECTRIC SHOCK!
Do not bend or crush the power cord during
installation! Otherwise the cord may get damaged.
RISK OF INJURY!
There is risk of injury during installation because
of the sharp edges. During installation always use
protective gloves.
All safety bolts and safety covers shall be installed in the
way specified in the instructions, otherwise the appliance
may fall.

Advertisement

Table of Contents
loading

Table of Contents