Table of Contents
Advertisement
Invisible laser radiation
Laser radiation can cause irreparable damage to eyes and skin.
Follow the laser safety regulations that apply in your area.
Take note of the laser classification of the individual test module.
WARNING
Take note of the laser classification or hazard level of the device
Make sure that you protect yourself and others from exposure to
Never look into optical outputs of devices or into the plug end
Always cover disconnected optical plugs or disconnected optical
Always switch off the instrument and disconnect it from any fiber
Make sure that the fiber optic cables are disconnected from all
Specific
To find out the appropriate laser classification, associated wavelengths
and optical power levels, see:
laser safety
–
–
In accordance with the laser classification, read and follow the
instructions given in the laser safety warnings below.
Laser classification of the SFP transceiver in the SFP slot
SFP laser classification
Use only class 1 laser products in the SFP slots.
However, the user is free to use any other SFP transceiver compatible
with the SFP Multi Source Agreement (MSA).
CAUTION
In this case you must observe the laser classification of the
T-BERD/MTS-2000V2, 4000V2, 5800V2 • OCC-4056C • User Manual 2019.04
under test.
laser radiation.
surfaces (free ends) of optical fibers.
cable connectors with protective caps.
optic cables before inspecting or cleaning the optical cable
connectors.
sources of radiation before they are cleaned or inspected and
ensure that they are not reconnected until cleaning or inspection
has been completed.
the label on the SFP module
the "Specifications" chapter in the operating manual of the SFP
inserted SFP transceiver and its safety instructions!
Chapter 1 Optical Spectrum Measurement
Safety information
7
Advertisement
Table of Contents
