Table of Contents
Advertisement
Chapter 1 Optical Spectrum Measurement
Table display
Table notes
T-BERD/MTS-2000V2, 4000V2, 5800V2 • OCC-4056C • User Manual 2019.04
32
A note of not more than 40 characters, entered by the user, may be
associated with each channel.
NOTE
Each note is associated with a channel. Consequently, if the channel
is deleted, the note the will be deleted too.
NOTE
These notes appear in the table only if they have been validated in the
S
menu on the
ETUP
option must be confirmed in order to be able to create a note.
To enter a note:
1. In the table, select the channel.
2. Press the
Table Contents
3. Enter the text of the note and confirm its creation.
4. Press the
Exit
key to return to the previous menu if necessary.
NOTE
The table notes are not stored in the measurement results.
Displaying relative results
By default, the table gives the results in absolute values. To obtain these
results in relative values with respect to a reference channel:
1. Press the
Table Contents
Relative.
2. Move the cursor on to the channel that is to serve as the reference.
3. Press the
Set Ref Channel
with respect to this channel of reference.
Table notes
line (Result screen). Similarly, this
key, then press Notes.
softkey, then
softkey. The results are recalculated
Relative/Absolute
to select
Advertisement
Table of Contents
