Table of Contents
Advertisement
Over-the-Air Programming
7.2
Generating a TXT File
7.2.1
Using CCS
Follow these steps to generate a .txt file from CCS (see
1. Right click on the project.
2. Select the "Build" option.
3. In the"Post-build steps" in the "Steps" tab enter this text:
"${CG_TOOL_HEX}" --ti_txt "${BuildArtifactFileName}" -o "${BuildArtifactFileBaseName}.txt" -order MS
-romwidth 16
4. Compile the project. The .txt binary output is saved to the "Debug" folder.
28
RF430FRL152HEVM User's Guide
Figure 23. RF Programming Completed
Figure 24. CCS TXT Generation
Copyright © 2014–2018, Texas Instruments Incorporated
Figure
24):
SLAU607C – December 2014 – Revised July 2018
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
