Child lock
The appliance has a child lock to make sure children
cannot operate it inadvertently.
Notes
‒
You must set the child lock in the factory setting to
"Available" (see section entitled 'Factory setting').
‒
If there is a power cut while the child lock is
activated, it may be deactivated when the power
returns.
Activating the child lock
Requirement:
Program selector is set to
0
Touch the
symbol for at least 6 seconds.
The child lock is activated. The standby screen appears.
0
The
appears at the top of the display.
Deactivating the child lock
Requirement:
Program selector is set to
1
Touch the
symbol for at least 6 seconds.
The child lock is deactivated. You can switch on the
appliance in the usual manner.
26
.
0
0
.