Table of Contents
Advertisement
/
The appliance starts.
the display. The Sabbath screen will appear as shown.
The oven and display lighting is off. The control panel is
blocked and no tone can be heard when you touch it.
The appliance no longer heats after expiry of the time.
The display is blank. Set the program selector to
Switching off:
To cancel the operation, set the program selector to
Yom Tov mode
With this function, the appliance is programmed to
perform in three stages.
Stage 1 and 2 can be programmed for a maximum total
duration of 74 hours. The duration of Step 3 is 1 hour
and cannot be modified.
maintains a warm temperature of 122° F
Stage 1:
(50°C) in the convection heating function. The interior
oven lights remain off through this stage.
the appliance raises to a desired temperature
Stage 2:
setting and maintains a temperature between 120 and
450° F (50 -230°C). For warming and cooking foods in
the convection heating function. The desired time can
be adjusted for this stage. The interior oven lights will
be on during this time.
maintains a warm temperature of 122° F
Stage 3:
(50°C) in the convection heating function for 1 hour
after stage 2 has ended. The interior oven lights will be
on during this time.
Note that easily perishable foodstuffs must not be left in
the oven for too long.
Setting the Yom Tov mode
1
Set the program selector to
/
2
Touch the
symbol.
20
and the temperature appear in
0
ž
.
The suggested value of 24h at 185° F (85°C)
appears in the display.
To set Stage 2 cooking time with rotary selector:
1
Touch the
2 cooking time
.
2
Set the desired Stage 2 cooking time with the
rotary selector.
3
Touch the
.
0
cooking time
4
Select the end time with the rotary selector.
5
Change the date if needed by touching the
symbol to
6
Rotate the selector to the desired date.
7
Confirm settings by touching the
To set Stage 2 temperature:
1
Rotate selector to desired Stage 2 temperature.
2
Start with
The temperatures of Stage 1 and Stage 2 appear in the
display. The remaining time to the beginning of Stage 2
is counted down in the display. The Yom Tov screen will
appear as shown.
The program will begin with the pre-set warm
temperature without light, then advance to the
programmed temperature with light until the end of the
set date and time, and then maintain the pre-set warm
temperature for 60 minutes.
The appliance no longer heats after expiry of the time.
The display is blank. Set the program selector to
Switching off:
To cancel the operation, set the program selector to
$
symbol to adjust the duration of Stage
6
.
C
symbol to adjust the end of Stage 2
5
.
V
.
™
I
.
C
symbol.
.
0
0
.
Advertisement
Table of Contents
