Table of Contents
Advertisement
Figure 57. Removing the optical drive bay shield
Step 2.
(Optional) Install the optical drive retainer.
a.
Align the pin on the bottom of the retainer and the corresponding slot on the optical drive,
then insert the pin into the slot.
b.
Insert the rest two pins on retainer to the corresponding slots on the optical drive.
Figure 58. Installing the retainer to the optical drive
Step 3.
(Optional) Align the optical drive bezel with the slots on the optical drive; then, insert the bezel into
the optical drive.
.
Chapter 3
Hardware replacement procedures
75
Advertisement
Table of Contents
