Epson WorkForce WF-2960DWF User Manual page 90

Table of Contents

Advertisement

Faxing
>
Menu Options for Faxing
Sharpness:
Enhances or defocuses the outline of the image. + enhances the sharpness, and - defocuses the
sharpness.
ADF Continuous Scan:
Sending faxes by placing originals one by one, or by placing originals by size, you can send
them as one document at their original sizes. See the related information below on this topic.
Original Size (Glass):
Select the size and orientation of the original you placed on the scanner glass.
Color Mode:
Select whether to scan in color or in monochrome.
Fax Send Settings:
Direct Send:
Sends a monochrome fax while scanning the originals. Since scanned originals are not stored
temporarily in the printer's memory even when sending a large volume of pages, you can avoid
printer errors due to a lack of memory. Note that sending using this feature takes longer than
not using this feature. See the related information below on this topic.
You cannot use this feature when sending a fax to multiple recipients.
Send Fax Later:
Sends a fax at a time you specified. Only a monochrome fax is available when using this
option. See the related information below on this topic.
Add Sender Information:
Add Sender Information:
Fax Header:
Additional Information:
>
Fax Settings
Select the position where you want to include the header information (sender name and
fax number) in the outgoing fax, or not to include the information.
❏ Off: Sends a fax with no header information.
❏ Outside of Image: Sends a fax with header information in the top white margin of
the fax. This keeps the header from overlapping with the scanned image, however,
the fax received by the recipient may be printed across two sheets depending on the
size of the originals.
❏ Inside of Image: Sends a fax with header information approximately 7 mm lower
than the top of the scanned image. The header may overlap with the image, however,
the fax received by the recipient will not be split into two documents.
Select the header for the recipient. To use this feature, you should register multiple
headers in advance.
Select the information you want to add. You can select one from Your Phone Number
and Destination List.
90

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workforce wf-2960 series

Table of Contents