Table of Contents
Advertisement
Product Information
Network Status:
Wired LAN/Wi-Fi Status:
Displays the printer's network information.
Wi-Fi Direct Status:
Displays the Wi-Fi Direct setting information.
Print Status Sheet:
Prints a network status sheet.
The information for Ethernet, Wi-Fi, Wi-Fi Direct, and so on is printed on two or more pages.
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Device Name:
Changes the device name to any name within 2 to 15 characters.
TCP/IP:
Configures the IP settings, if the IP address is static.
For automatic configuration, use the IP address assigned by DHCP.
To set manually, switch to "Manual" and then enter the IP address you want to assign.
Proxy Server:
Set this if you are using a proxy server in your network environment and want to set it for the
printer as well.
IPv6 Address:
Sets whether or not to enable IPv6 addressing.
Link Speed & Duplex:
Select an appropriate Ethernet speed and duplex setting. If you select a setting other than Auto,
make sure the setting corresponds to the settings on the hub you are using.
Web Service Settings
Select the menus on the control panel as described below.
Settings > General Settings > Web Service Settings
Epson Connect Services:
Displays whether the printer is registered and connected to Epson Connect.
You can register to the service by selecting Register and follow the instructions.
>
>
Settings Menu List
General Settings
216
Advertisement
Table of Contents
