Selecting A Channel; To Transmit And Receive - Uniden UH037SX-2NB User Manual

Operation

Selecting a Channel

Press channel
desired channel.

To Transmit and Receive

The UH037SX-2NB uses the UHF-CB Channels. Refer to page 10 for UHF
channel usage. (Channels 22 and 23 are for telemetry and telecommand
applications. Transmit is inhibited on these channels).
1. The transmit power of the
UH037SX-2NB is 500mW which will
provide a range of up to 3+Km.
2. Before you transmit, listen for
activity on the selected channel.
3. When the channel is clear, press and hold the
to transmit. TX appears on the LCD.
Hold the radio with microphone approximately 5 cm in
front of your mouth with the antenna at approximately 45°
angle away from your head. Speak in a clear, normal
conversational voice.
4. When you have finished speaking,
release the
the LCD. Listen for a response.
UNIDEN UH037SX-2NB
or to select the
. TX then disappears on
PTT
Switch
PTT
PTT Switch
switch
PTT
Switch
5
dup
ch/ vol/
scan mon
mic
dup
ch/ vol/
scan mon
mic
dup
ch/ vol/
scan mon
mic
dup
ch/ vol/
scan mon
mic
dup
ch/ vol/
scan mon
mic
dup
ch/ vol/
scan mon
mic
TX
TX
TX
UHF CB Transceiver