Table of Contents
Advertisement
Powering off the
cooking hob
A
Engaging the control
unit lock / child safety
lock
Remaining heat
indicator
Power Boost and Super
Power Boost
12
• The cooking hob may be switched off anytime by
touching the on/off sensor (A). All settings will be
deleted, except for the minute minder (see section
»Timer«).
By activating the control unit lock, you can prevent the
operation or use of the cooking zones. Thus, the control
unit lock also works as a child safety lock.
Activating the child lock
• The hob must be switched off .
• Press the (A) sensor to switch on the cooking hob.
Setting »0« will be indicated on all displays.
• Simultaneously press the (C) sensor for the rear left
cooking zone and the »–« sensor (E) and hold them for
approximately 3 seconds. After the beep, »L« will appear
for a few seconds on all displays.
The child lock is now activated.
Deactivating the child lock
• Press the (A) sensor to switch on the cooking hob. »L«
will appear on all display units.
• Simultaneously press the (C) sensor for the rear
cooking zone and the »–« sensor (E) and hold them for
approximately 3 seconds. Setting »0« will be indicated
on all displays. The child lock is now deactivated.
Glass ceramic hob also features remaining heat indicator
"H". Hotplates are not heated directly, but through return
heat radiating from the dish. As long as the symbol "H" is
on after the hotplate was switched off , the remaining heat
may be used for warming up food or for melting.
Even when the symbol "H" disappears, the hotplate may
still be hot. Be careful of burns!
For rapid cooking, power boost can be activated for any
cooking zone. This will allow you to rapidly heat large
amounts of food using extra power.
Advertisement
Table of Contents
